Post Stock Login Register

EN 10028-2 13CrMoV9-10 vs EN 10028-2 12CrMoV12-10

Strong Match — 87.7% match based on chemical composition and mechanical property overlap.

EN 10028-2 13CrMoV9-10 (EN 10028-2:2017) and EN 10028-2 12CrMoV12-10 (EN 10028-2:2017) are both steel grades. Both fall under the Alloy Steel category. EN 10028-2 13CrMoV9-10 is typically used for flat products for pressure purposes, while EN 10028-2 12CrMoV12-10 is commonly used for flat products for pressure purposes. EN 10028-2 13CrMoV9-10 is defined under European Standard (EN), originating from Europe, while EN 10028-2 12CrMoV12-10 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10028-2 13CrMoV9-10 vs EN 10028-2 12CrMoV12-10 is a 81.5% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 87.7%.

Frequently Compared With EN 10028-2 13CrMoV9-10:
EN 10028-2 12CrMo9-10 IS 1570 (Part 4) 07Cr4Mo6 IS 4367 10Cr9Mo10 IS 4367 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
81.5%
MECHANICAL MATCH
100%
OVERALL
87.7%
Specifications
Property EN 10028-2 13CrMoV9-10 EN 10028-2 12CrMoV12-10
Standard EN 10028-2:2017 EN 10028-2:2017
Category Alloy Steel Alloy Steel
C (%) 0.11-0.15 0.10-0.15
Si (%) <=0.10 <=0.15
Mn (%) 0.30-0.60 0.30-0.60
P (%) <=0.015 <=0.015
S (%) <=0.005 <=0.005
N (%) <=0.012 <=0.012
Cr (%) 2.00-2.50 2.75-3.25
Cu (%) <=0.20 <=0.25
Mo (%) 0.90-1.10 0.90-1.10
Nb (%) <=0.07 <=0.07
Ni (%) <=0.25 <=0.25
Ti (%) <=0.03 <=0.03
V (%) 0.25-0.35 0.20-0.30
B (%) <=0.002 <=0.003
Ca (%) <=0.015 <=0.015
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10028-2 13CrMoV9-10 EN 10028-2 12CrMoV12-10
Tensile Strength 600-780 MPa 600-780 MPa
Yield Strength >=455 MPa >=455 MPa
Elongation >=18% >=18%
Condition Usual delivery condition normalized and tempered (+NT), nominal thickness up to 60 mm; transverse direction, Yield Strength is ReH, Elongation is A Usual delivery condition normalized and tempered (+NT), nominal thickness up to 60 mm; transverse direction, Yield Strength is ReH, Elongation is A
Typical Applications
EN 10028-2 13CrMoV9-10
Flat products for pressure purposes
EN 10028-2 12CrMoV12-10
Flat products for pressure purposes
Can EN 10028-2 13CrMoV9-10 Be Substituted With EN 10028-2 12CrMoV12-10?
EN 10028-2 13CrMoV9-10 and EN 10028-2 12CrMoV12-10 overlap closely enough on chemistry and mechanical properties that EN 10028-2 12CrMoV12-10 is often considered as a substitute for EN 10028-2 13CrMoV9-10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10028-2 13CrMoV9-10
0 active listings and RFQs →
EN 10028-2 12CrMoV12-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10028-2 13CrMoV9-10 and EN 10028-2 12CrMoV12-10?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10028-2 13CrMoV9-10 be substituted with EN 10028-2 12CrMoV12-10?
EN 10028-2 13CrMoV9-10 and EN 10028-2 12CrMoV12-10 overlap closely enough on chemistry and mechanical properties that EN 10028-2 12CrMoV12-10 is often considered as a substitute for EN 10028-2 13CrMoV9-10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.