Post Stock Login Register

EN 10083-1 36NiCrMo16 vs GB/T 3077 35Cr2Ni4Mo

Related Material — 68.1% match based on chemical composition and mechanical property overlap.

EN 10083-1 36NiCrMo16 (EN 10083-1:1996) and GB/T 3077 35Cr2Ni4Mo (GB/T 3077:2015) are both steel grades. Both fall under the Alloy Steel category. EN 10083-1 36NiCrMo16 is typically used for quenched and tempered machine parts (clause 1.1), while GB/T 3077 35Cr2Ni4Mo is commonly used for hot-rolled or forged structural alloy steel bars. EN 10083-1 36NiCrMo16 is defined under European Standard (EN), originating from Europe, while GB/T 3077 35Cr2Ni4Mo is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, EN 10083-1 36NiCrMo16 vs GB/T 3077 35Cr2Ni4Mo is a 89.7% match. As per mechanical properties, the match is 25%. Combined, this makes them a related material overall at 68.1%.

Frequently Compared With EN 10083-1 36NiCrMo16:
IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H
Match Breakdown
CHEMISTRY MATCH
89.7%
MECHANICAL MATCH
25%
OVERALL
68.1%
Specifications
Property EN 10083-1 36NiCrMo16 GB/T 3077 35Cr2Ni4Mo
Standard EN 10083-1:1996 GB/T 3077:2015
Category Alloy Steel Alloy Steel
C (%) 0.32-0.39 0.32-0.39
Cr (%) 1.60-2.00 1.60-2.00
Mn (%) 0.30-0.60 0.50-0.80
Mo (%) 0.25-0.45 0.25-0.45
Ni (%) 3.60-4.10 3.60-4.10
P (%) <=0.030 <=0.030
S (%) <=0.025 <=0.030
Si (%) <=0.40 0.17-0.37
Cu (%) Not specified <=0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10083-1 36NiCrMo16 GB/T 3077 35Cr2Ni4Mo
Condition Quenched and tempered, ruling section d <= 16 mm Quenched and tempered, test sample 25 mm; hardness is for bars delivered annealed or high temperature tempered
Elongation 9% min >=10%
Hardness Soft annealed: 269 HB max <=269 HB
Tensile Strength 1250 to 1450 MPa >=1130 MPa
Yield Strength 1050 MPa min >=980 MPa
Typical Applications
EN 10083-1 36NiCrMo16
Quenched and tempered machine parts (clause 1.1)
GB/T 3077 35Cr2Ni4Mo
Hot-rolled or forged structural alloy steel bars
Key Differences
Can EN 10083-1 36NiCrMo16 Be Substituted With GB/T 3077 35Cr2Ni4Mo?
EN 10083-1 36NiCrMo16 and GB/T 3077 35Cr2Ni4Mo share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10083-1 36NiCrMo16
0 active listings and RFQs →
GB/T 3077 35Cr2Ni4Mo
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10083-1 36NiCrMo16 and GB/T 3077 35Cr2Ni4Mo?
GB/T 3077 35Cr2Ni4Mo specifies Cu which is not specified for EN 10083-1 36NiCrMo16.
Can EN 10083-1 36NiCrMo16 be substituted with GB/T 3077 35Cr2Ni4Mo?
EN 10083-1 36NiCrMo16 and GB/T 3077 35Cr2Ni4Mo share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.