Post Stock Login Register

EN 10083-1 36NiCrMo16 vs IS 1570 (Part 5) X108Cr17Mo

Related Material — 65% match based on chemical composition and mechanical property overlap.

EN 10083-1 36NiCrMo16 (EN 10083-1:1996) and IS 1570 (Part 5) X108Cr17Mo (IS 1570 (Part 5):1985) are both steel grades. EN 10083-1 36NiCrMo16 is classified under Alloy Steel, while IS 1570 (Part 5) X108Cr17Mo is classified under Stainless Steel — a different category, which is worth noting alongside the chemistry match below. EN 10083-1 36NiCrMo16 is defined under European Standard (EN), originating from Europe, while IS 1570 (Part 5) X108Cr17Mo is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10083-1 36NiCrMo16 vs IS 1570 (Part 5) X108Cr17Mo is a 60.3% match. As per mechanical properties, the match is 100%. Combined, this makes them a related material overall at 65%.

Frequently Compared With EN 10083-1 36NiCrMo16:
IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H
Match Breakdown
CHEMISTRY MATCH
60.3%
MECHANICAL MATCH
100%
OVERALL
65%
Specifications
Property EN 10083-1 36NiCrMo16 IS 1570 (Part 5) X108Cr17Mo
Standard EN 10083-1:1996 IS 1570 (Part 5):1985
Category Alloy Steel Stainless Steel
C (%) 0.32-0.39 0.95-1.20
Cr (%) 1.60-2.00 16.0-18.0
Mn (%) 0.30-0.60 <=1.0
Mo (%) 0.25-0.45 <=0.75
Ni (%) 3.60-4.10 <=0.50
P (%) <=0.030 <=0.045
S (%) <=0.025 <=0.030
Si (%) <=0.40 <=1.0
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10083-1 36NiCrMo16 IS 1570 (Part 5) X108Cr17Mo
Condition Quenched and tempered, ruling section d <= 16 mm Annealed, quenched or solution treated plates, sheets and strips (Table 2)
Elongation 9% min Not specified
Hardness Soft annealed: 269 HB max <=269 HB
Tensile Strength 1250 to 1450 MPa Not specified
Yield Strength 1050 MPa min Not specified
Typical Applications
EN 10083-1 36NiCrMo16
Quenched and tempered machine parts (clause 1.1)
IS 1570 (Part 5) X108Cr17Mo
Not documented
Key Differences
Can EN 10083-1 36NiCrMo16 Be Substituted With IS 1570 (Part 5) X108Cr17Mo?
EN 10083-1 36NiCrMo16 and IS 1570 (Part 5) X108Cr17Mo share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10083-1 36NiCrMo16
0 active listings and RFQs →
IS 1570 (Part 5) X108Cr17Mo
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10083-1 36NiCrMo16 and IS 1570 (Part 5) X108Cr17Mo?
Different category: EN 10083-1 36NiCrMo16 is Alloy Steel, IS 1570 (Part 5) X108Cr17Mo is Stainless Steel.
Can EN 10083-1 36NiCrMo16 be substituted with IS 1570 (Part 5) X108Cr17Mo?
EN 10083-1 36NiCrMo16 and IS 1570 (Part 5) X108Cr17Mo share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.