Post Stock Login Register

EN 10084 14NiCrMo13-4 vs NF A35-565 100C6

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

EN 10084 14NiCrMo13-4 (EN 10084:2008) and NF A35-565 100C6 are both steel grades. Both fall under the Alloy Steel category. EN 10084 14NiCrMo13-4 is typically used for case hardened machine parts: carburized or carbonitrided, then hardened (clause 3.1), while NF A35-565 100C6 is commonly used for ball bearings, roller bearings, bearing races, rollers, precision tools, wear resistant parts. EN 10084 14NiCrMo13-4 is defined under European Standard (EN), originating from Europe, while NF A35-565 100C6 is defined under Association Francaise de Normalisation (NF), originating from France.

As per chemical composition, EN 10084 14NiCrMo13-4 vs NF A35-565 100C6 is a 58.6% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With EN 10084 14NiCrMo13-4:
UNI 11234 100Cr6 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 7) 10Mo6H IS 11169 (Part 1) 10Ni5Cr4
Match Breakdown
CHEMISTRY MATCH
58.6%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property EN 10084 14NiCrMo13-4 NF A35-565 100C6
Standard EN 10084:2008 NF A35-565
Category Alloy Steel Alloy Steel
C (%) 0.11-0.17 0.95-1.05
Cr (%) 0.80-1.10 1.35-1.65
Mn (%) 0.30-0.60 0.25-0.45
Mo (%) 0.20-0.30 Not specified
Ni (%) 3.00-3.50 Not specified
P (%) <=0.025 <=0.027
S (%) <=0.035 <=0.025
Si (%) <=0.40 0.15-0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10084 14NiCrMo13-4 NF A35-565 100C6
Condition Soft annealed Not specified
Hardenability +H band at 1.5 mm from the quenched end: 39 to 47 HRC Not specified
Hardness Soft annealed: 241 HB max 60-66 HRC
Tensile Strength Not specified 850-1100 MPa
Typical Applications
EN 10084 14NiCrMo13-4
Case hardened machine parts: carburized or carbonitrided, then hardened (clause 3.1)
NF A35-565 100C6
ball bearings, roller bearings, bearing races, rollers, precision tools, wear resistant parts
Key Differences
Can EN 10084 14NiCrMo13-4 Be Substituted With NF A35-565 100C6?
EN 10084 14NiCrMo13-4 and NF A35-565 100C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10084 14NiCrMo13-4
No active listings currently.
NF A35-565 100C6
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6700–6700 mm (263.78–263.78 in)
On M-EX Right Now
EN 10084 14NiCrMo13-4
0 active listings and RFQs →
NF A35-565 100C6
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10084 14NiCrMo13-4 and NF A35-565 100C6?
EN 10084 14NiCrMo13-4 specifies Mo, Ni which are not specified for NF A35-565 100C6.
Can EN 10084 14NiCrMo13-4 be substituted with NF A35-565 100C6?
EN 10084 14NiCrMo13-4 and NF A35-565 100C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.