Related Material — 62.2% match
based on chemical composition and mechanical property overlap.
EN 10084 20MoCr3 (EN 10084:2008) and IS 1570 (Part 7) 10Cr36Mo10H (IS 1570 (Part 7):1992) are both steel grades.
Both fall under the Alloy Steel category.
EN 10084 20MoCr3 is typically used for case hardened machine parts: carburized or carbonitrided, then hardened (clause 3.1), while IS 1570 (Part 7) 10Cr36Mo10H is commonly used for boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature.
EN 10084 20MoCr3 is defined under European Standard (EN), originating from Europe, while IS 1570 (Part 7) 10Cr36Mo10H is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, EN 10084 20MoCr3 vs IS 1570 (Part 7) 10Cr36Mo10H is a 62.2% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a related material overall at 62.2%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10084 20MoCr3
IS 1570 (Part 7) 10Cr36Mo10H
Condition
Soft annealed
Pipes, A, thickness - (first row of Table 3)
Hardenability
+H band at 1.5 mm from the quenched end: 41 to 49 HRC
Not specified
Hardness
Soft annealed: 217 HB max
Not specified
Tensile Strength
Not specified
410-560 MPa
Yield Strength
Not specified
>=135 MPa (0.2 % proof stress)
Elongation
Not specified
>=20%
Typical Applications
EN 10084 20MoCr3
Case hardened machine parts: carburized or carbonitrided, then hardened (clause 3.1)
IS 1570 (Part 7) 10Cr36Mo10H
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
Key Differences
IS 1570 (Part 7) 10Cr36Mo10H specifies Al (metallic) which is not specified for EN 10084 20MoCr3.
Can EN 10084 20MoCr3 Be Substituted With IS 1570 (Part 7) 10Cr36Mo10H?
EN 10084 20MoCr3 and IS 1570 (Part 7) 10Cr36Mo10H share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between EN 10084 20MoCr3 and IS 1570 (Part 7) 10Cr36Mo10H?
IS 1570 (Part 7) 10Cr36Mo10H specifies Al (metallic) which is not specified for EN 10084 20MoCr3.
Can EN 10084 20MoCr3 be substituted with IS 1570 (Part 7) 10Cr36Mo10H?
EN 10084 20MoCr3 and IS 1570 (Part 7) 10Cr36Mo10H share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.