Post Stock Login Register

EN 10084 28Cr4 vs BS 970 (Part 1) 530A30

Strong Match — 86.2% match based on chemical composition and mechanical property overlap.

EN 10084 28Cr4 (EN 10084:2008) and BS 970 (Part 1) 530A30 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Alloy Steel category. EN 10084 28Cr4 is typically used for case hardened machine parts: carburized or carbonitrided, then hardened (clause 3.1), while BS 970 (Part 1) 530A30 is commonly used for through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of table 6.. EN 10084 28Cr4 is defined under European Standard (EN), originating from Europe, while BS 970 (Part 1) 530A30 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, EN 10084 28Cr4 vs BS 970 (Part 1) 530A30 is a 86.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 86.2%.

Frequently Compared With EN 10084 28Cr4:
IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H
Match Breakdown
CHEMISTRY MATCH
86.2%
MECHANICAL MATCH
No shared data
OVERALL
86.2%
Specifications
Property EN 10084 28Cr4 BS 970 (Part 1) 530A30
Standard EN 10084:2008 BS 970 (Part 1):1983
Category Alloy Steel Alloy Steel
C (%) 0.24-0.31 0.28-0.33
Cr (%) 0.90-1.20 0.90-1.20
Mn (%) 0.60-0.90 0.60-0.80
P (%) <=0.025 <=0.035
S (%) <=0.035 <=0.040
Si (%) <=0.40 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10084 28Cr4 BS 970 (Part 1) 530A30
Condition Soft annealed Not specified
Hardenability +H band at 1.5 mm from the quenched end: 45 to 53 HRC Not specified
Hardness Soft annealed: 217 HB max Not specified
Typical Applications
EN 10084 28Cr4
Case hardened machine parts: carburized or carbonitrided, then hardened (clause 3.1)
BS 970 (Part 1) 530A30
Through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of Table 6.
Key Differences
Can EN 10084 28Cr4 Be Substituted With BS 970 (Part 1) 530A30?
EN 10084 28Cr4 and BS 970 (Part 1) 530A30 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 530A30 is often considered as a substitute for EN 10084 28Cr4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10084 28Cr4
0 active listings and RFQs →
BS 970 (Part 1) 530A30
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10084 28Cr4 and BS 970 (Part 1) 530A30?
EN 10084 28Cr4 specifies Si which is not specified for BS 970 (Part 1) 530A30.
Can EN 10084 28Cr4 be substituted with BS 970 (Part 1) 530A30?
EN 10084 28Cr4 and BS 970 (Part 1) 530A30 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 530A30 is often considered as a substitute for EN 10084 28Cr4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.