Post Stock Login Register

EN 10084 C16E vs BS 970 EN32C

Strong Match — 93.3% match based on chemical composition and mechanical property overlap.

EN 10084 C16E (EN 10084:2008) and BS 970 EN32C (BS 970:1955) are both steel grades. Both fall under the Carbon Steel category. EN 10084 C16E is defined under European Standard (EN), originating from Europe, while BS 970 EN32C is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, EN 10084 C16E vs BS 970 EN32C is a 93.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 93.3%.

Frequently Compared With EN 10084 C16E:
BS 970 (Part 3) 080A15 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 060A67 BS 970 (Part 1) 040A12 BS 970 (Part 3) 045M10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 055M15
Match Breakdown
CHEMISTRY MATCH
93.3%
MECHANICAL MATCH
No shared data
OVERALL
93.3%
Specifications
Property EN 10084 C16E BS 970 EN32C
Standard EN 10084:2008 BS 970:1955
Category Carbon Steel Carbon Steel
C (%) 0.12-0.18 0.10-0.18
Mn (%) 0.60-0.90 0.60-1.00
P (%) <=0.035 <=0.050
S (%) <=0.035 <=0.050
Si (%) <=0.40 0.05-0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10084 C16E BS 970 EN32C
Condition Soft annealed Core, after heat treatment (lowest-strength condition of the standard)
Hardness Soft annealed: 156 HB max Not specified
Tensile Strength Not specified ≥494 MPa (32 tons/sq in, converted)
Elongation Not specified ≥20%
Typical Applications
EN 10084 C16E
Case hardened machine parts: carburized or carbonitrided, then hardened (clause 3.1)
BS 970 EN32C
Not documented
Can EN 10084 C16E Be Substituted With BS 970 EN32C?
EN 10084 C16E and BS 970 EN32C overlap closely enough on chemistry and mechanical properties that BS 970 EN32C is often considered as a substitute for EN 10084 C16E in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10084 C16E
0 active listings and RFQs →
BS 970 EN32C
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10084 C16E and BS 970 EN32C?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10084 C16E be substituted with BS 970 EN32C?
EN 10084 C16E and BS 970 EN32C overlap closely enough on chemistry and mechanical properties that BS 970 EN32C is often considered as a substitute for EN 10084 C16E in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.