Post Stock Login Register

EN 10087 11SMn30 vs JIS G4804 SUM23L

Strong Match — 89.9% match based on chemical composition and mechanical property overlap.

EN 10087 11SMn30 (EN 10087:1998) and JIS G4804 SUM23L (JIS G 4804:2021) are both steel grades. Both fall under the Free Machining Steel category. EN 10087 11SMn30 is typically used for high volume screw machine parts, bolts, studs, while JIS G4804 SUM23L is commonly used for small precision turned parts. EN 10087 11SMn30 is defined under European Standard (EN), originating from Europe, while JIS G4804 SUM23L is defined under Japanese Industrial Standards (JIS), originating from Japan.

As per chemical composition, EN 10087 11SMn30 vs JIS G4804 SUM23L is a 84.8% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 89.9%.

Frequently Compared With EN 10087 11SMn30:
SAE J403 1141 IS 4432 10C8S10 SAE J403 1117 SAE J403 1117 IS 1570 (Part 3) 10C8S10 SAE J403 1117 SAE J403 1118 SAE J403 1118 SAE J403 1118 SAE J403 1126 SAE J403 1126 SAE J403 1126
Match Breakdown
CHEMISTRY MATCH
84.8%
MECHANICAL MATCH
100%
OVERALL
89.9%
Specifications
Property EN 10087 11SMn30 JIS G4804 SUM23L
Standard EN 10087:1998 JIS G 4804:2021
Category Free Machining Steel Free Machining Steel
C (%) ≤0.14 ≤0.09
Si (%) ≤0.05 Not specified
Mn (%) 0.90–1.30 0.75–1.05
S (%) 0.27–0.33 0.26–0.35
P (%) ≤0.110 0.04–0.09
Pb (%) Not specified 0.10–0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10087 11SMn30 JIS G4804 SUM23L
Tensile Strength 380–570 MPa 380–490 MPa
Elongation ≥7% Not specified
Hardness ≤180 HB Not specified
Typical Applications
EN 10087 11SMn30
High volume screw machine parts, bolts, studs
JIS G4804 SUM23L
Small precision turned parts
Key Differences
Can EN 10087 11SMn30 Be Substituted With JIS G4804 SUM23L?
EN 10087 11SMn30 and JIS G4804 SUM23L overlap closely enough on chemistry and mechanical properties that JIS G4804 SUM23L is often considered as a substitute for EN 10087 11SMn30 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
EN 10087 11SMn30
Hex Bar → (3 listings)
Across Flats: 25–25 mm (0.98–0.98 in)
Length: 2900–3600 mm (114.17–141.73 in)
JIS G4804 SUM23L
Hex Bar → (2 listings)
Across Flats: 25–25 mm (0.98–0.98 in)
Length: 2900–3200 mm (114.17–125.98 in)
On M-EX Right Now
EN 10087 11SMn30
3 active listings and RFQs →
JIS G4804 SUM23L
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10087 11SMn30 and JIS G4804 SUM23L?
EN 10087 11SMn30 specifies Si which is not specified for JIS G4804 SUM23L. JIS G4804 SUM23L specifies Pb which is not specified for EN 10087 11SMn30.
Can EN 10087 11SMn30 be substituted with JIS G4804 SUM23L?
EN 10087 11SMn30 and JIS G4804 SUM23L overlap closely enough on chemistry and mechanical properties that JIS G4804 SUM23L is often considered as a substitute for EN 10087 11SMn30 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.