Post Stock Login Register

EN 10088-1 X105CrMo17 vs IS 1570 (Part 5) X85Cr18Mo2V

Close Alternative — 72.5% match based on chemical composition and mechanical property overlap.

EN 10088-1 X105CrMo17 (EN 10088-1:2014) and IS 1570 (Part 5) X85Cr18Mo2V (IS 1570 (Part 5):1985) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X105CrMo17 is defined under European Standard (EN), originating from Europe, while IS 1570 (Part 5) X85Cr18Mo2V is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10088-1 X105CrMo17 vs IS 1570 (Part 5) X85Cr18Mo2V is a 72.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 72.5%.

Frequently Compared With EN 10088-1 X105CrMo17:
EN 10088-1 1.4301 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH GOST 5632 06Kh23N28
Match Breakdown
CHEMISTRY MATCH
72.5%
MECHANICAL MATCH
No shared data
OVERALL
72.5%
Specifications
Property EN 10088-1 X105CrMo17 IS 1570 (Part 5) X85Cr18Mo2V
Standard EN 10088-1:2014 IS 1570 (Part 5):1985
Category Stainless Steel Stainless Steel
C (%) 0.95-1.20 0.80-0.90
Si (%) <=1.00 <=1.0
Mn (%) <=1.00 <=1.5
P (%) <=0.040 <=0.045
S (%) <=0.015 <=0.035
Cr (%) 16.0-18.0 16.5-18.5
Mo (%) 0.40-0.80 <=2.5
V (%) Not specified <=0.60
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X105CrMo17 IS 1570 (Part 5) X85Cr18Mo2V
Hardness Not specified 255-306 HB
Condition Not specified Valve steel, hardened and tempered (Table 6)
Key Differences
Can EN 10088-1 X105CrMo17 Be Substituted With IS 1570 (Part 5) X85Cr18Mo2V?
EN 10088-1 X105CrMo17 and IS 1570 (Part 5) X85Cr18Mo2V are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X105CrMo17
0 active listings and RFQs →
IS 1570 (Part 5) X85Cr18Mo2V
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X105CrMo17 and IS 1570 (Part 5) X85Cr18Mo2V?
IS 1570 (Part 5) X85Cr18Mo2V specifies V which is not specified for EN 10088-1 X105CrMo17.
Can EN 10088-1 X105CrMo17 be substituted with IS 1570 (Part 5) X85Cr18Mo2V?
EN 10088-1 X105CrMo17 and IS 1570 (Part 5) X85Cr18Mo2V are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.