Post Stock Login Register

EN 10088-1 X10CrAlSi18 vs ASTM A959 430FSe

Close Alternative — 83.2% match based on chemical composition and mechanical property overlap.

EN 10088-1 X10CrAlSi18 (EN 10088-1:2014) and ASTM A959 430FSe (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X10CrAlSi18 is defined under European Standard (EN), originating from Europe, while ASTM A959 430FSe is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X10CrAlSi18 vs ASTM A959 430FSe is a 83.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 83.2%.

Frequently Compared With EN 10088-1 X10CrAlSi18:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
83.2%
MECHANICAL MATCH
No shared data
OVERALL
83.2%
Specifications
Property EN 10088-1 X10CrAlSi18 ASTM A959 430FSe
Standard EN 10088-1:2014 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.12 <=0.12
Si (%) 0.70-1.40 <=1.00
Mn (%) <=1.00 <=1.25
P (%) <=0.040 <=0.06
S (%) <=0.015 <=0.06
Cr (%) 17.0-19.0 16.0-18.0
Al (%) 0.70-1.20 Not specified
Se (%) Not specified >=0.15
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X10CrAlSi18
Not documented
ASTM A959 430FSe
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can EN 10088-1 X10CrAlSi18 Be Substituted With ASTM A959 430FSe?
EN 10088-1 X10CrAlSi18 and ASTM A959 430FSe are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X10CrAlSi18
0 active listings and RFQs →
ASTM A959 430FSe
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X10CrAlSi18 and ASTM A959 430FSe?
EN 10088-1 X10CrAlSi18 specifies Al which is not specified for ASTM A959 430FSe. ASTM A959 430FSe specifies Se which is not specified for EN 10088-1 X10CrAlSi18.
Can EN 10088-1 X10CrAlSi18 be substituted with ASTM A959 430FSe?
EN 10088-1 X10CrAlSi18 and ASTM A959 430FSe are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.