Post Stock Login Register

EN 10088-1 X10CrAlSi7 vs ASTM A959 SS410

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X10CrAlSi7 (EN 10088-1:2014) and ASTM A959 SS410 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X10CrAlSi7 is defined under European Standard (EN), originating from Europe, while ASTM A959 SS410 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X10CrAlSi7 vs ASTM A959 SS410 is a 83.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With EN 10088-1 X10CrAlSi7:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
83.1%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property EN 10088-1 X10CrAlSi7 ASTM A959 SS410
Standard EN 10088-1:2014 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.12 <=0.15
Si (%) 0.50-1.00 <=1.00
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.015 <=0.030
Cr (%) 6.0-8.0 11.5-13.5
Al (%) 0.50-1.00 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X10CrAlSi7
Not documented
ASTM A959 SS410
Cutlery, turbine blades, surgical instruments, fasteners
Key Differences
Can EN 10088-1 X10CrAlSi7 Be Substituted With ASTM A959 SS410?
EN 10088-1 X10CrAlSi7 and ASTM A959 SS410 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10088-1 X10CrAlSi7
No active listings currently.
ASTM A959 SS410
Round Bar → (3 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 2800–3300 mm (110.24–129.92 in)
On M-EX Right Now
EN 10088-1 X10CrAlSi7
0 active listings and RFQs →
ASTM A959 SS410
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X10CrAlSi7 and ASTM A959 SS410?
EN 10088-1 X10CrAlSi7 specifies Al which is not specified for ASTM A959 SS410.
Can EN 10088-1 X10CrAlSi7 be substituted with ASTM A959 SS410?
EN 10088-1 X10CrAlSi7 and ASTM A959 SS410 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.