Related Material — 59.3% match
based on chemical composition and mechanical property overlap.
EN 10088-1 X10CrMoVNb9-1 (EN 10088-1:2014) and IS 4367 10Cr9Mo10 (IS 4367:1991) are both steel grades.
EN 10088-1 X10CrMoVNb9-1 is classified under Stainless Steel, while IS 4367 10Cr9Mo10 is classified under Alloy Steel — a different category, which is worth noting alongside the chemistry match below.
EN 10088-1 X10CrMoVNb9-1 is defined under European Standard (EN), originating from Europe, while IS 4367 10Cr9Mo10 is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, EN 10088-1 X10CrMoVNb9-1 vs IS 4367 10Cr9Mo10 is a 59.3% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a related material overall at 59.3%.
Frequently Compared With EN 10088-1 X10CrMoVNb9-1:
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10088-1 X10CrMoVNb9-1
IS 4367 10Cr9Mo10
Tensile Strength
Not specified
410-590 MPa
Yield Strength
Not specified
245 MPa min
Elongation
Not specified
>=18%
Izod Impact
Not specified
55 J min
Hardness (soft annealed)
Not specified
<=187 HB
Condition
Not specified
Normalised and tempered, ruling section up to 50 mm
Key Differences
Different category: EN 10088-1 X10CrMoVNb9-1 is Stainless Steel, IS 4367 10Cr9Mo10 is Alloy Steel.
EN 10088-1 X10CrMoVNb9-1 specifies N, Al, Nb, V which are not specified for IS 4367 10Cr9Mo10.
Can EN 10088-1 X10CrMoVNb9-1 Be Substituted With IS 4367 10Cr9Mo10?
EN 10088-1 X10CrMoVNb9-1 and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between EN 10088-1 X10CrMoVNb9-1 and IS 4367 10Cr9Mo10?
Different category: EN 10088-1 X10CrMoVNb9-1 is Stainless Steel, IS 4367 10Cr9Mo10 is Alloy Steel. EN 10088-1 X10CrMoVNb9-1 specifies N, Al, Nb, V which are not specified for IS 4367 10Cr9Mo10.
Can EN 10088-1 X10CrMoVNb9-1 be substituted with IS 4367 10Cr9Mo10?
EN 10088-1 X10CrMoVNb9-1 and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.