Post Stock Login Register

EN 10088-1 X10CrNiMoMnNbVB15-10-1 vs ASTM A959 S21500

Strong Match — 87.5% match based on chemical composition and mechanical property overlap.

EN 10088-1 X10CrNiMoMnNbVB15-10-1 (EN 10088-1:2014) and ASTM A959 S21500 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X10CrNiMoMnNbVB15-10-1 is defined under European Standard (EN), originating from Europe, while ASTM A959 S21500 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X10CrNiMoMnNbVB15-10-1 vs ASTM A959 S21500 is a 87.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 87.5%.

Frequently Compared With EN 10088-1 X10CrNiMoMnNbVB15-10-1:
GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
87.5%
MECHANICAL MATCH
No shared data
OVERALL
87.5%
Specifications
Property EN 10088-1 X10CrNiMoMnNbVB15-10-1 ASTM A959 S21500
Standard EN 10088-1:2014 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) 0.07-0.13 0.06-0.15
Si (%) <=1.00 0.2-1.0
Mn (%) 5.5-7.0 5.5-7.0
P (%) <=0.040 <=0.045
S (%) <=0.030 <=0.030
Cr (%) 14.0-16.0 14.0-16.0
Mo (%) 0.80-1.20 0.80-1.20
Ni (%) 9.0-11.0 9.0-11.0
N (%) <=0.10 Not specified
Nb (%) 0.75-1.25 Not specified
V (%) 0.15-0.40 0.15-0.40
B (%) 0.003-0.009 0.003-0.009
Cb (%) Not specified 0.75-1.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X10CrNiMoMnNbVB15-10-1
Not documented
ASTM A959 S21500
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can EN 10088-1 X10CrNiMoMnNbVB15-10-1 Be Substituted With ASTM A959 S21500?
EN 10088-1 X10CrNiMoMnNbVB15-10-1 and ASTM A959 S21500 overlap closely enough on chemistry and mechanical properties that ASTM A959 S21500 is often considered as a substitute for EN 10088-1 X10CrNiMoMnNbVB15-10-1 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X10CrNiMoMnNbVB15-10-1
0 active listings and RFQs →
ASTM A959 S21500
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X10CrNiMoMnNbVB15-10-1 and ASTM A959 S21500?
EN 10088-1 X10CrNiMoMnNbVB15-10-1 specifies N, Nb which are not specified for ASTM A959 S21500. ASTM A959 S21500 specifies Cb which is not specified for EN 10088-1 X10CrNiMoMnNbVB15-10-1.
Can EN 10088-1 X10CrNiMoMnNbVB15-10-1 be substituted with ASTM A959 S21500?
EN 10088-1 X10CrNiMoMnNbVB15-10-1 and ASTM A959 S21500 overlap closely enough on chemistry and mechanical properties that ASTM A959 S21500 is often considered as a substitute for EN 10088-1 X10CrNiMoMnNbVB15-10-1 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.