Post Stock Login Register

EN 10088-1 X10NiCrSiNb35-22 vs ASTM A959 302

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X10NiCrSiNb35-22 (EN 10088-1:2014) and ASTM A959 302 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X10NiCrSiNb35-22 is defined under European Standard (EN), originating from Europe, while ASTM A959 302 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X10NiCrSiNb35-22 vs ASTM A959 302 is a 69.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With EN 10088-1 X10NiCrSiNb35-22:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
69.9%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property EN 10088-1 X10NiCrSiNb35-22 ASTM A959 302
Standard EN 10088-1:2014 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.15 <=0.15
Si (%) 1.00-2.00 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.030 <=0.045
S (%) <=0.015 <=0.030
Cr (%) 20.0-23.0 17.0-19.0
Ni (%) 33.0-37.0 8.0-10.0
N (%) <=0.10 <=0.10
Nb (%) 1.00-1.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X10NiCrSiNb35-22
Not documented
ASTM A959 302
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can EN 10088-1 X10NiCrSiNb35-22 Be Substituted With ASTM A959 302?
EN 10088-1 X10NiCrSiNb35-22 and ASTM A959 302 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X10NiCrSiNb35-22
0 active listings and RFQs →
ASTM A959 302
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X10NiCrSiNb35-22 and ASTM A959 302?
EN 10088-1 X10NiCrSiNb35-22 specifies Nb which is not specified for ASTM A959 302.
Can EN 10088-1 X10NiCrSiNb35-22 be substituted with ASTM A959 302?
EN 10088-1 X10NiCrSiNb35-22 and ASTM A959 302 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.