Post Stock Login Register

EN 10088-1 X12CrNiMoV12-3 vs EN 10088-1 X22CrMoV12-1

Related Material — 69.8% match based on chemical composition and mechanical property overlap.

EN 10088-1 X12CrNiMoV12-3 (EN 10088-1:2014) and EN 10088-1 X22CrMoV12-1 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X12CrNiMoV12-3 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X22CrMoV12-1 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X12CrNiMoV12-3 vs EN 10088-1 X22CrMoV12-1 is a 69.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.8%.

Frequently Compared With EN 10088-1 X12CrNiMoV12-3:
IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10
Match Breakdown
CHEMISTRY MATCH
69.8%
MECHANICAL MATCH
No shared data
OVERALL
69.8%
Specifications
Property EN 10088-1 X12CrNiMoV12-3 EN 10088-1 X22CrMoV12-1
Standard EN 10088-1:2014 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.08-0.15 0.18-0.24
Si (%) <=0.50 <=0.50
Mn (%) 0.40-0.90 0.40-0.90
P (%) <=0.025 <=0.025
S (%) <=0.015 <=0.015
Cr (%) 11.0-12.5 11.0-12.5
Mo (%) 1.50-2.00 0.80-1.20
Ni (%) 2.00-3.00 0.30-0.80
N (%) 0.020-0.040 Not specified
V (%) 0.25-0.40 0.25-0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X12CrNiMoV12-3 Be Substituted With EN 10088-1 X22CrMoV12-1?
EN 10088-1 X12CrNiMoV12-3 and EN 10088-1 X22CrMoV12-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X12CrNiMoV12-3
0 active listings and RFQs →
EN 10088-1 X22CrMoV12-1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X12CrNiMoV12-3 and EN 10088-1 X22CrMoV12-1?
EN 10088-1 X12CrNiMoV12-3 specifies N which is not specified for EN 10088-1 X22CrMoV12-1.
Can EN 10088-1 X12CrNiMoV12-3 be substituted with EN 10088-1 X22CrMoV12-1?
EN 10088-1 X12CrNiMoV12-3 and EN 10088-1 X22CrMoV12-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.