Close Alternative — 76.4% match
based on chemical composition and mechanical property overlap.
EN 10088-1 X14CrMoS17 (EN 10088-1:2014) and ASTM A959 434 (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 X14CrMoS17 is defined under European Standard (EN), originating from Europe, while ASTM A959 434 is defined under ASTM International, originating from United States.
As per chemical composition, EN 10088-1 X14CrMoS17 vs ASTM A959 434 is a 76.4% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a close alternative overall at 76.4%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X14CrMoS17
Not documented
ASTM A959 434
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can EN 10088-1 X14CrMoS17 Be Substituted With ASTM A959 434?
EN 10088-1 X14CrMoS17 and ASTM A959 434 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between EN 10088-1 X14CrMoS17 and ASTM A959 434?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X14CrMoS17 be substituted with ASTM A959 434?
EN 10088-1 X14CrMoS17 and ASTM A959 434 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.