EN 10088-1 X15CrNiSi25-4 vs EN 10088-1 X8CrNi25-21
Related Material — 69.9% match
based on chemical composition and mechanical property overlap.
EN 10088-1 X15CrNiSi25-4 (EN 10088-1:2014) and EN 10088-1 X8CrNi25-21 (EN 10088-1:2014) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 X15CrNiSi25-4 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X8CrNi25-21 is defined under European Standard (EN), originating from Europe.
As per chemical composition, EN 10088-1 X15CrNiSi25-4 vs EN 10088-1 X8CrNi25-21 is a 76.7% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a related material overall at 69.9%.
Frequently Compared With EN 10088-1 X15CrNiSi25-4:
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X15CrNiSi25-4
Not documented
EN 10088-1 X8CrNi25-21
Furnace parts, heat exchangers, kiln furniture
Can EN 10088-1 X15CrNiSi25-4 Be Substituted With EN 10088-1 X8CrNi25-21?
EN 10088-1 X15CrNiSi25-4 and EN 10088-1 X8CrNi25-21 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between EN 10088-1 X15CrNiSi25-4 and EN 10088-1 X8CrNi25-21?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X15CrNiSi25-4 be substituted with EN 10088-1 X8CrNi25-21?
EN 10088-1 X15CrNiSi25-4 and EN 10088-1 X8CrNi25-21 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.