Post Stock Login Register

EN 10088-1 X1CrNiMoCuN24-22-8 vs ASTM A240/A240M S82441

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X1CrNiMoCuN24-22-8 (EN 10088-1:2014) and ASTM A240/A240M S82441 (ASTM A240/A240M:2025) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X1CrNiMoCuN24-22-8 is defined under European Standard (EN), originating from Europe, while ASTM A240/A240M S82441 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X1CrNiMoCuN24-22-8 vs ASTM A240/A240M S82441 is a 70% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With EN 10088-1 X1CrNiMoCuN24-22-8:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
70%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property EN 10088-1 X1CrNiMoCuN24-22-8 ASTM A240/A240M S82441
Standard EN 10088-1:2014 ASTM A240/A240M:2025
Category Stainless Steel Stainless Steel
C (%) <=0.020 <=0.030
Si (%) <=0.50 <=0.70
Mn (%) 2.00-4.0 2.50-4.00
P (%) <=0.030 <=0.035
S (%) <=0.005 <=0.005
Cr (%) 23.0-25.0 23.0-25.0
Mo (%) 7.0-8.0 1.00-2.00
Ni (%) 21.0-23.0 3.0-4.5
N (%) 0.45-0.55 0.20-0.30
Cu (%) 0.30-0.60 0.10-0.80
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X1CrNiMoCuN24-22-8 ASTM A240/A240M S82441
Tensile Strength Not specified >=740 MPa
Yield Strength Not specified >=540 MPa
Elongation Not specified >=25%
Hardness Not specified <=290 HB
Condition Not specified t < 0.4 in. [10.0 mm] (first condition printed); yield by 0.2 percent offset
Typical Applications
EN 10088-1 X1CrNiMoCuN24-22-8
Not documented
ASTM A240/A240M S82441
Pressure vessels and general applications (plate, sheet and strip)
Can EN 10088-1 X1CrNiMoCuN24-22-8 Be Substituted With ASTM A240/A240M S82441?
EN 10088-1 X1CrNiMoCuN24-22-8 and ASTM A240/A240M S82441 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X1CrNiMoCuN24-22-8
0 active listings and RFQs →
ASTM A240/A240M S82441
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X1CrNiMoCuN24-22-8 and ASTM A240/A240M S82441?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X1CrNiMoCuN24-22-8 be substituted with ASTM A240/A240M S82441?
EN 10088-1 X1CrNiMoCuN24-22-8 and ASTM A240/A240M S82441 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.