Post Stock Login Register

EN 10088-1 X1NiCrMoCu31-27-4 vs EN 10088-1 1.4301

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

EN 10088-1 X1NiCrMoCu31-27-4 (EN 10088-1:2014) and EN 10088-1 1.4301 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X1NiCrMoCu31-27-4 is defined under European Standard (EN), originating from Europe, while EN 10088-1 1.4301 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X1NiCrMoCu31-27-4 vs EN 10088-1 1.4301 is a 50.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With EN 10088-1 X1NiCrMoCu31-27-4:
ASTM A959 26-3-3 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
50.5%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property EN 10088-1 X1NiCrMoCu31-27-4 EN 10088-1 1.4301
Standard EN 10088-1:2014 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.020 ≤0.07
Si (%) <=0.70 ≤1.00
Mn (%) <=2.00 ≤2.00
P (%) <=0.030 ≤0.045
S (%) <=0.010 ≤0.030
Cr (%) 26.0-28.0 17.5–19.5
Mo (%) 3.0-4.0 Not specified
Ni (%) 30.0-32.0 8.0–10.5
N (%) <=0.10 Not specified
Cu (%) 0.70-1.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X1NiCrMoCu31-27-4 EN 10088-1 1.4301
Tensile Strength Not specified ≥520 MPa
Yield Strength Not specified ≥210 MPa
Elongation Not specified ≥45%
Hardness Not specified ≤215 HB
Typical Applications
EN 10088-1 X1NiCrMoCu31-27-4
Not documented
EN 10088-1 1.4301
Food equipment, chemical vessels, architectural, kitchenware
Key Differences
Can EN 10088-1 X1NiCrMoCu31-27-4 Be Substituted With EN 10088-1 1.4301?
EN 10088-1 X1NiCrMoCu31-27-4 and EN 10088-1 1.4301 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10088-1 X1NiCrMoCu31-27-4
No active listings currently.
EN 10088-1 1.4301
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3300 mm (98.43–129.92 in)
On M-EX Right Now
EN 10088-1 X1NiCrMoCu31-27-4
0 active listings and RFQs →
EN 10088-1 1.4301
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X1NiCrMoCu31-27-4 and EN 10088-1 1.4301?
EN 10088-1 X1NiCrMoCu31-27-4 specifies Mo, N, Cu which are not specified for EN 10088-1 1.4301.
Can EN 10088-1 X1NiCrMoCu31-27-4 be substituted with EN 10088-1 1.4301?
EN 10088-1 X1NiCrMoCu31-27-4 and EN 10088-1 1.4301 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.