Close Alternative — 73.5% match
based on chemical composition and mechanical property overlap.
EN 10088-1 X2CrNi18-9 (EN 10088-1:2014) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 X2CrNi18-9 is defined under European Standard (EN) (Europe).
As per chemical composition, EN 10088-1 X2CrNi18-9 vs GOST 5632 08X18H10 is a 73.5% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a close alternative overall at 73.5%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10088-1 X2CrNi18-9
GOST 5632 08X18H10
Tensile Strength
Not specified
≥520 MPa
Yield Strength
Not specified
≥205 MPa
Elongation
Not specified
≥40%
Typical Applications
EN 10088-1 X2CrNi18-9
Not documented
GOST 5632 08X18H10
Chemical equipment, food processing, general corrosion resistant applications
Key Differences
EN 10088-1 X2CrNi18-9 specifies N which is not specified for GOST 5632 08X18H10.
Can EN 10088-1 X2CrNi18-9 Be Substituted With GOST 5632 08X18H10?
EN 10088-1 X2CrNi18-9 and GOST 5632 08X18H10 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between EN 10088-1 X2CrNi18-9 and GOST 5632 08X18H10?
EN 10088-1 X2CrNi18-9 specifies N which is not specified for GOST 5632 08X18H10.
Can EN 10088-1 X2CrNi18-9 be substituted with GOST 5632 08X18H10?
EN 10088-1 X2CrNi18-9 and GOST 5632 08X18H10 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.