Strong Match — 87.8% match
based on chemical composition and mechanical property overlap.
EN 10088-1 X2CrNiMoN22-5-3 (EN 10088-1:2014) and ASTM A959 2205 (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 X2CrNiMoN22-5-3 is defined under European Standard (EN), originating from Europe, while ASTM A959 2205 is defined under ASTM International, originating from United States.
As per chemical composition, EN 10088-1 X2CrNiMoN22-5-3 vs ASTM A959 2205 is a 87.8% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 87.8%.
Frequently Compared With EN 10088-1 X2CrNiMoN22-5-3:
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X2CrNiMoN22-5-3
Not documented
ASTM A959 2205
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can EN 10088-1 X2CrNiMoN22-5-3 Be Substituted With ASTM A959 2205?
EN 10088-1 X2CrNiMoN22-5-3 and ASTM A959 2205 overlap closely enough on chemistry and mechanical properties that ASTM A959 2205 is often considered as a substitute for EN 10088-1 X2CrNiMoN22-5-3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between EN 10088-1 X2CrNiMoN22-5-3 and ASTM A959 2205?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X2CrNiMoN22-5-3 be substituted with ASTM A959 2205?
EN 10088-1 X2CrNiMoN22-5-3 and ASTM A959 2205 overlap closely enough on chemistry and mechanical properties that ASTM A959 2205 is often considered as a substitute for EN 10088-1 X2CrNiMoN22-5-3 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.