Post Stock Login Register

EN 10088-1 X2CrNiMoN29-7-2 vs ASTM A240/A240M S32520

Related Material — 68% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrNiMoN29-7-2 (EN 10088-1:2014) and ASTM A240/A240M S32520 (ASTM A240/A240M:2025) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrNiMoN29-7-2 is defined under European Standard (EN), originating from Europe, while ASTM A240/A240M S32520 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X2CrNiMoN29-7-2 vs ASTM A240/A240M S32520 is a 68% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 68%.

Frequently Compared With EN 10088-1 X2CrNiMoN29-7-2:
GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H ASTM A959 .- EN 10088-1 1.4301 EN 10088-1 1.4401
Match Breakdown
CHEMISTRY MATCH
68%
MECHANICAL MATCH
No shared data
OVERALL
68%
Specifications
Property EN 10088-1 X2CrNiMoN29-7-2 ASTM A240/A240M S32520
Standard EN 10088-1:2014 ASTM A240/A240M:2025
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Si (%) <=0.50 <=0.80
Mn (%) 0.80-1.50 <=1.50
P (%) <=0.030 <=0.035
S (%) <=0.015 <=0.020
Cr (%) 28.0-30.0 24.0-26.0
Mo (%) 1.50-2.60 3.0-4.0
Ni (%) 5.8-7.5 5.5-8.0
N (%) 0.30-0.40 0.20-0.35
Cu (%) <=0.80 0.50-2.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X2CrNiMoN29-7-2 ASTM A240/A240M S32520
Tensile Strength Not specified >=770 MPa
Yield Strength Not specified >=550 MPa
Elongation Not specified >=25%
Hardness Not specified <=310 HB
Condition Not specified Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
EN 10088-1 X2CrNiMoN29-7-2
Not documented
ASTM A240/A240M S32520
Pressure vessels and general applications (plate, sheet and strip)
Can EN 10088-1 X2CrNiMoN29-7-2 Be Substituted With ASTM A240/A240M S32520?
EN 10088-1 X2CrNiMoN29-7-2 and ASTM A240/A240M S32520 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X2CrNiMoN29-7-2
0 active listings and RFQs →
ASTM A240/A240M S32520
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrNiMoN29-7-2 and ASTM A240/A240M S32520?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X2CrNiMoN29-7-2 be substituted with ASTM A240/A240M S32520?
EN 10088-1 X2CrNiMoN29-7-2 and ASTM A240/A240M S32520 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.