Post Stock Login Register

EN 10088-1 X2CrNiMoN29-7-2 vs ASTM A240/A240M S32950

Related Material — 69.4% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrNiMoN29-7-2 (EN 10088-1:2014) and ASTM A240/A240M S32950 (ASTM A240/A240M:2025) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrNiMoN29-7-2 is defined under European Standard (EN), originating from Europe, while ASTM A240/A240M S32950 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X2CrNiMoN29-7-2 vs ASTM A240/A240M S32950 is a 69.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.4%.

Frequently Compared With EN 10088-1 X2CrNiMoN29-7-2:
GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H ASTM A959 .- EN 10088-1 1.4301 EN 10088-1 1.4401
Match Breakdown
CHEMISTRY MATCH
69.4%
MECHANICAL MATCH
No shared data
OVERALL
69.4%
Specifications
Property EN 10088-1 X2CrNiMoN29-7-2 ASTM A240/A240M S32950
Standard EN 10088-1:2014 ASTM A240/A240M:2025
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Si (%) <=0.50 <=0.60
Mn (%) 0.80-1.50 <=2.00
P (%) <=0.030 <=0.035
S (%) <=0.015 <=0.010
Cr (%) 28.0-30.0 26.0-29.0
Mo (%) 1.50-2.60 1.00-2.50
Ni (%) 5.8-7.5 3.5-5.2
N (%) 0.30-0.40 0.15-0.35
Cu (%) <=0.80 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X2CrNiMoN29-7-2 ASTM A240/A240M S32950
Tensile Strength Not specified >=690 MPa
Yield Strength Not specified >=485 MPa
Elongation Not specified >=15%
Hardness Not specified <=293 HB
Condition Not specified Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
EN 10088-1 X2CrNiMoN29-7-2
Not documented
ASTM A240/A240M S32950
Pressure vessels and general applications (plate, sheet and strip)
Key Differences
Can EN 10088-1 X2CrNiMoN29-7-2 Be Substituted With ASTM A240/A240M S32950?
EN 10088-1 X2CrNiMoN29-7-2 and ASTM A240/A240M S32950 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X2CrNiMoN29-7-2
0 active listings and RFQs →
ASTM A240/A240M S32950
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrNiMoN29-7-2 and ASTM A240/A240M S32950?
EN 10088-1 X2CrNiMoN29-7-2 specifies Cu which is not specified for ASTM A240/A240M S32950.
Can EN 10088-1 X2CrNiMoN29-7-2 be substituted with ASTM A240/A240M S32950?
EN 10088-1 X2CrNiMoN29-7-2 and ASTM A240/A240M S32950 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.