Post Stock Login Register

EN 10088-1 X2CrNiMoV13-5-2 vs ASTM A959 XM-16

Related Material — 63.1% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrNiMoV13-5-2 (EN 10088-1:2014) and ASTM A959 XM-16 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrNiMoV13-5-2 is defined under European Standard (EN), originating from Europe, while ASTM A959 XM-16 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X2CrNiMoV13-5-2 vs ASTM A959 XM-16 is a 63.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 63.1%.

Frequently Compared With EN 10088-1 X2CrNiMoV13-5-2:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
63.1%
MECHANICAL MATCH
No shared data
OVERALL
63.1%
Specifications
Property EN 10088-1 X2CrNiMoV13-5-2 ASTM A959 XM-16
Standard EN 10088-1:2014 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.03
Si (%) <=0.50 <=0.50
Mn (%) <=0.50 <=0.50
P (%) <=0.040 <=0.040
S (%) <=0.015 <=0.030
Cr (%) 11.5-13.5 11.0-12.5
Mo (%) 1.50-2.50 <=0.50
Ni (%) 4.5-6.5 7.5-9.5
Ti (%) <=0.010 0.80-1.40
V (%) 0.10-0.50 Not specified
Cb (%) Not specified 0.10-0.50
Cu (%) Not specified 1.50-2.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X2CrNiMoV13-5-2
Not documented
ASTM A959 XM-16
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can EN 10088-1 X2CrNiMoV13-5-2 Be Substituted With ASTM A959 XM-16?
EN 10088-1 X2CrNiMoV13-5-2 and ASTM A959 XM-16 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X2CrNiMoV13-5-2
0 active listings and RFQs →
ASTM A959 XM-16
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrNiMoV13-5-2 and ASTM A959 XM-16?
EN 10088-1 X2CrNiMoV13-5-2 specifies V which is not specified for ASTM A959 XM-16. ASTM A959 XM-16 specifies Cb, Cu which are not specified for EN 10088-1 X2CrNiMoV13-5-2.
Can EN 10088-1 X2CrNiMoV13-5-2 be substituted with ASTM A959 XM-16?
EN 10088-1 X2CrNiMoV13-5-2 and ASTM A959 XM-16 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.