Close Alternative — 78.1% match
based on chemical composition and mechanical property overlap.
EN 10088-1 X2CrTi12 (EN 10088-1:2014) and JIS G4303 SUS410 (JIS G4303:2021) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 X2CrTi12 is defined under European Standard (EN), originating from Europe, while JIS G4303 SUS410 is defined under Japanese Industrial Standards (JIS), originating from Japan.
As per chemical composition, EN 10088-1 X2CrTi12 vs JIS G4303 SUS410 is a 78.1% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a close alternative overall at 78.1%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
JIS G4303 SUS410 specifies Ni which is not specified for EN 10088-1 X2CrTi12.
Can EN 10088-1 X2CrTi12 Be Substituted With JIS G4303 SUS410?
EN 10088-1 X2CrTi12 and JIS G4303 SUS410 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between EN 10088-1 X2CrTi12 and JIS G4303 SUS410?
JIS G4303 SUS410 specifies Ni which is not specified for EN 10088-1 X2CrTi12.
Can EN 10088-1 X2CrTi12 be substituted with JIS G4303 SUS410?
EN 10088-1 X2CrTi12 and JIS G4303 SUS410 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.