Post Stock Login Register

EN 10088-1 X2CrTi24 vs JIS G4304 SUS445J1

Close Alternative — 77.8% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrTi24 (EN 10088-1:2014) and JIS G4304 SUS445J1 (JIS G4304:2021) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrTi24 is defined under European Standard (EN), originating from Europe, while JIS G4304 SUS445J1 is defined under Japanese Industrial Standards (JIS), originating from Japan.

As per chemical composition, EN 10088-1 X2CrTi24 vs JIS G4304 SUS445J1 is a 77.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 77.8%.

Frequently Compared With EN 10088-1 X2CrTi24:
GOST 5632 06Kh23N28 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
77.8%
MECHANICAL MATCH
No shared data
OVERALL
77.8%
Specifications
Property EN 10088-1 X2CrTi24 JIS G4304 SUS445J1
Standard EN 10088-1:2014 JIS G4304:2021
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.025
Si (%) <=1.00 <=1.00
Mn (%) <=1.00 <=1.00
P (%) <=0.050 <=0.040
S (%) <=0.050 <=0.030
Cr (%) 22.0-25.0 21.00-24.00
Mo (%) <=0.50 0.70-1.50
Ni (%) <=0.50 <=0.60
Cu (%) <=0.50 Not specified
Al (%) <=0.05 Not specified
N (%) Not specified <=0.025
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X2CrTi24 JIS G4304 SUS445J1
Tensile Strength Not specified >=410 MPa
Yield Strength Not specified >=245 MPa
Elongation Not specified >=20%
Hardness Not specified <=217 HB
Condition Not specified Annealed plate and strip; proof strength applies only when specified by the purchaser
Typical Applications
EN 10088-1 X2CrTi24
Not documented
JIS G4304 SUS445J1
Hot-rolled stainless steel plates and strips
Key Differences
Can EN 10088-1 X2CrTi24 Be Substituted With JIS G4304 SUS445J1?
EN 10088-1 X2CrTi24 and JIS G4304 SUS445J1 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X2CrTi24
0 active listings and RFQs →
JIS G4304 SUS445J1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrTi24 and JIS G4304 SUS445J1?
EN 10088-1 X2CrTi24 specifies Cu, Al which are not specified for JIS G4304 SUS445J1. JIS G4304 SUS445J1 specifies N which is not specified for EN 10088-1 X2CrTi24.
Can EN 10088-1 X2CrTi24 be substituted with JIS G4304 SUS445J1?
EN 10088-1 X2CrTi24 and JIS G4304 SUS445J1 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.