Strong Match — 94.7% match
based on chemical composition and mechanical property overlap.
EN 10088-1 X3CrNb17 (EN 10088-1:2014) and IS 6603 X03Cr17Nb (IS 6603:2024) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 X3CrNb17 is defined under European Standard (EN), originating from Europe, while IS 6603 X03Cr17Nb is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, EN 10088-1 X3CrNb17 vs IS 6603 X03Cr17Nb is a 94.7% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 94.7%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10088-1 X3CrNb17
IS 6603 X03Cr17Nb
Tensile Strength
Not specified
>=420 MPa
Yield Strength
Not specified
>=230 MPa
Elongation
Not specified
>=20%
Condition
Not specified
Annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 100 mm; Tensile Strength is a minimum as printed
Typical Applications
EN 10088-1 X3CrNb17
Not documented
IS 6603 X03Cr17Nb
General purposes, semi-finished products, bars, wire rods and bright bars
Key Differences
IS 6603 X03Cr17Nb specifies Nb which is not specified for EN 10088-1 X3CrNb17.
Can EN 10088-1 X3CrNb17 Be Substituted With IS 6603 X03Cr17Nb?
EN 10088-1 X3CrNb17 and IS 6603 X03Cr17Nb overlap closely enough on chemistry and mechanical properties that IS 6603 X03Cr17Nb is often considered as a substitute for EN 10088-1 X3CrNb17 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between EN 10088-1 X3CrNb17 and IS 6603 X03Cr17Nb?
IS 6603 X03Cr17Nb specifies Nb which is not specified for EN 10088-1 X3CrNb17.
Can EN 10088-1 X3CrNb17 be substituted with IS 6603 X03Cr17Nb?
EN 10088-1 X3CrNb17 and IS 6603 X03Cr17Nb overlap closely enough on chemistry and mechanical properties that IS 6603 X03Cr17Nb is often considered as a substitute for EN 10088-1 X3CrNb17 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.