Post Stock Login Register

EN 10088-1 X3CrNiMoBN17-13-3 vs ASTM A959 316LN

Close Alternative — 81.7% match based on chemical composition and mechanical property overlap.

EN 10088-1 X3CrNiMoBN17-13-3 (EN 10088-1:2014) and ASTM A959 316LN (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X3CrNiMoBN17-13-3 is defined under European Standard (EN), originating from Europe, while ASTM A959 316LN is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X3CrNiMoBN17-13-3 vs ASTM A959 316LN is a 81.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 81.7%.

Frequently Compared With EN 10088-1 X3CrNiMoBN17-13-3:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
81.7%
MECHANICAL MATCH
No shared data
OVERALL
81.7%
Specifications
Property EN 10088-1 X3CrNiMoBN17-13-3 ASTM A959 316LN
Standard EN 10088-1:2014 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.04 <=0.030
Si (%) <=0.75 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.035 <=0.045
S (%) <=0.015 <=0.030
Cr (%) 16.0-18.0 16.0-18.0
Mo (%) 2.00-3.00 2.00-3.00
Ni (%) 12.0-14.0 10.0-13.0
N (%) 0.10-0.18 0.10-0.16
B (%) 0.0015-0.0050 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X3CrNiMoBN17-13-3
Not documented
ASTM A959 316LN
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can EN 10088-1 X3CrNiMoBN17-13-3 Be Substituted With ASTM A959 316LN?
EN 10088-1 X3CrNiMoBN17-13-3 and ASTM A959 316LN are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X3CrNiMoBN17-13-3
0 active listings and RFQs →
ASTM A959 316LN
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X3CrNiMoBN17-13-3 and ASTM A959 316LN?
EN 10088-1 X3CrNiMoBN17-13-3 specifies B which is not specified for ASTM A959 316LN.
Can EN 10088-1 X3CrNiMoBN17-13-3 be substituted with ASTM A959 316LN?
EN 10088-1 X3CrNiMoBN17-13-3 and ASTM A959 316LN are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.