Post Stock Login Register

EN 10088-1 X40CrMoVN16-2 vs JIS G4304 SUS434

Related Material — 62.5% match based on chemical composition and mechanical property overlap.

EN 10088-1 X40CrMoVN16-2 (EN 10088-1:2014) and JIS G4304 SUS434 (JIS G4304:2021) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X40CrMoVN16-2 is defined under European Standard (EN), originating from Europe, while JIS G4304 SUS434 is defined under Japanese Industrial Standards (JIS), originating from Japan.

As per chemical composition, EN 10088-1 X40CrMoVN16-2 vs JIS G4304 SUS434 is a 62.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 62.5%.

Frequently Compared With EN 10088-1 X40CrMoVN16-2:
IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
62.5%
MECHANICAL MATCH
No shared data
OVERALL
62.5%
Specifications
Property EN 10088-1 X40CrMoVN16-2 JIS G4304 SUS434
Standard EN 10088-1:2014 JIS G4304:2021
Category Stainless Steel Stainless Steel
C (%) 0.35-0.50 <=0.12
Si (%) <=1.00 <=1.00
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.015 <=0.030
Cr (%) 14.0-16.0 16.00-18.00
Mo (%) 1.00-2.50 0.75-1.25
Ni (%) <=0.50 <=0.60
V (%) <=1.50 Not specified
N (%) 0.10-0.30 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X40CrMoVN16-2 JIS G4304 SUS434
Tensile Strength Not specified >=450 MPa
Yield Strength Not specified >=205 MPa
Elongation Not specified >=22%
Hardness Not specified <=183 HB
Condition Not specified Annealed plate and strip; proof strength applies only when specified by the purchaser
Typical Applications
EN 10088-1 X40CrMoVN16-2
Not documented
JIS G4304 SUS434
Hot-rolled stainless steel plates and strips
Key Differences
Can EN 10088-1 X40CrMoVN16-2 Be Substituted With JIS G4304 SUS434?
EN 10088-1 X40CrMoVN16-2 and JIS G4304 SUS434 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X40CrMoVN16-2
0 active listings and RFQs →
JIS G4304 SUS434
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X40CrMoVN16-2 and JIS G4304 SUS434?
EN 10088-1 X40CrMoVN16-2 specifies V, N which are not specified for JIS G4304 SUS434.
Can EN 10088-1 X40CrMoVN16-2 be substituted with JIS G4304 SUS434?
EN 10088-1 X40CrMoVN16-2 and JIS G4304 SUS434 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.