Post Stock Login Register

EN 10088-1 X5CrNiMoCuNb14-5 vs JIS G4304 SUS329J1

Related Material — 66.8% match based on chemical composition and mechanical property overlap.

EN 10088-1 X5CrNiMoCuNb14-5 (EN 10088-1:2014) and JIS G4304 SUS329J1 (JIS G4304:2021) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X5CrNiMoCuNb14-5 is defined under European Standard (EN), originating from Europe, while JIS G4304 SUS329J1 is defined under Japanese Industrial Standards (JIS), originating from Japan.

As per chemical composition, EN 10088-1 X5CrNiMoCuNb14-5 vs JIS G4304 SUS329J1 is a 66.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 66.8%.

Frequently Compared With EN 10088-1 X5CrNiMoCuNb14-5:
IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr13H EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
66.8%
MECHANICAL MATCH
No shared data
OVERALL
66.8%
Specifications
Property EN 10088-1 X5CrNiMoCuNb14-5 JIS G4304 SUS329J1
Standard EN 10088-1:2014 JIS G4304:2021
Category Stainless Steel Stainless Steel
C (%) <=0.07 <=0.08
Si (%) <=0.70 <=1.00
Mn (%) <=1.00 <=1.50
P (%) <=0.040 <=0.040
S (%) <=0.015 <=0.030
Cr (%) 13.0-15.0 23.00-28.00
Mo (%) 1.20-2.00 1.00-3.00
Ni (%) 5.0-6.0 3.00-6.00
Cu (%) 1.20-2.00 Not specified
Nb (%) 0.15-0.60 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X5CrNiMoCuNb14-5 JIS G4304 SUS329J1
Tensile Strength Not specified >=590 MPa
Yield Strength Not specified >=390 MPa
Elongation Not specified >=18%
Hardness Not specified <=277 HB
Condition Not specified Solution heat treated plate and strip; proof strength applies only when specified by the purchaser
Typical Applications
EN 10088-1 X5CrNiMoCuNb14-5
Not documented
JIS G4304 SUS329J1
Hot-rolled stainless steel plates and strips
Key Differences
Can EN 10088-1 X5CrNiMoCuNb14-5 Be Substituted With JIS G4304 SUS329J1?
EN 10088-1 X5CrNiMoCuNb14-5 and JIS G4304 SUS329J1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X5CrNiMoCuNb14-5
0 active listings and RFQs →
JIS G4304 SUS329J1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X5CrNiMoCuNb14-5 and JIS G4304 SUS329J1?
EN 10088-1 X5CrNiMoCuNb14-5 specifies Cu, Nb which are not specified for JIS G4304 SUS329J1.
Can EN 10088-1 X5CrNiMoCuNb14-5 be substituted with JIS G4304 SUS329J1?
EN 10088-1 X5CrNiMoCuNb14-5 and JIS G4304 SUS329J1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.