Post Stock Login Register

EN 10088-1 X5CrNiN19-9 vs GB/T 3280 06Cr19Ni10

Strong Match — 91% match based on chemical composition and mechanical property overlap.

EN 10088-1 X5CrNiN19-9 (EN 10088-1:2014) and GB/T 3280 06Cr19Ni10 (GB/T 3280-2015) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X5CrNiN19-9 is defined under European Standard (EN), originating from Europe, while GB/T 3280 06Cr19Ni10 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, EN 10088-1 X5CrNiN19-9 vs GB/T 3280 06Cr19Ni10 is a 91% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 91%.

Frequently Compared With EN 10088-1 X5CrNiN19-9:
GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
91%
MECHANICAL MATCH
No shared data
OVERALL
91%
Specifications
Property EN 10088-1 X5CrNiN19-9 GB/T 3280 06Cr19Ni10
Standard EN 10088-1:2014 GB/T 3280-2015
Category Stainless Steel Stainless Steel
C (%) <=0.06 0.08 max
Si (%) <=1.00 1.00 max
Mn (%) <=2.00 2.00 max
P (%) <=0.045 0.045 max
S (%) <=0.015 0.030 max
Cr (%) 18.0-20.0 18.00-20.00
Ni (%) 8.0-11.0 8.00-11.00
N (%) 0.12-0.22 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X5CrNiN19-9 GB/T 3280 06Cr19Ni10
Tensile Strength Not specified 520-720 MPa
Yield Strength Not specified 205-310 MPa
Elongation Not specified 40-60%
Hardness Not specified 187 HB max
Typical Applications
EN 10088-1 X5CrNiN19-9
Not documented
GB/T 3280 06Cr19Ni10
Used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.
Key Differences
Can EN 10088-1 X5CrNiN19-9 Be Substituted With GB/T 3280 06Cr19Ni10?
EN 10088-1 X5CrNiN19-9 and GB/T 3280 06Cr19Ni10 overlap closely enough on chemistry and mechanical properties that GB/T 3280 06Cr19Ni10 is often considered as a substitute for EN 10088-1 X5CrNiN19-9 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
EN 10088-1 X5CrNiN19-9
No active listings currently.
GB/T 3280 06Cr19Ni10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2900–3300 mm (114.17–129.92 in)
On M-EX Right Now
EN 10088-1 X5CrNiN19-9
0 active listings and RFQs →
GB/T 3280 06Cr19Ni10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X5CrNiN19-9 and GB/T 3280 06Cr19Ni10?
EN 10088-1 X5CrNiN19-9 specifies N which is not specified for GB/T 3280 06Cr19Ni10.
Can EN 10088-1 X5CrNiN19-9 be substituted with GB/T 3280 06Cr19Ni10?
EN 10088-1 X5CrNiN19-9 and GB/T 3280 06Cr19Ni10 overlap closely enough on chemistry and mechanical properties that GB/T 3280 06Cr19Ni10 is often considered as a substitute for EN 10088-1 X5CrNiN19-9 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.