Post Stock Login Register

EN 10088-1 X6CrNiMoB17-12-2 vs EN 10088-1 X6CrNiMoTi17-12-2

Close Alternative — 84.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X6CrNiMoB17-12-2 (EN 10088-1:2014) and EN 10088-1 X6CrNiMoTi17-12-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X6CrNiMoB17-12-2 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X6CrNiMoTi17-12-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X6CrNiMoB17-12-2 vs EN 10088-1 X6CrNiMoTi17-12-2 is a 84.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 84.9%.

Frequently Compared With EN 10088-1 X6CrNiMoB17-12-2:
GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
84.9%
MECHANICAL MATCH
No shared data
OVERALL
84.9%
Specifications
Property EN 10088-1 X6CrNiMoB17-12-2 EN 10088-1 X6CrNiMoTi17-12-2
Standard EN 10088-1:2014 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.04-0.08 <=0.08
Si (%) <=1.00 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.035 <=0.045
S (%) <=0.015 <=0.015
Cr (%) 16.5-18.5 16.5-18.5
Mo (%) 2.00-2.50 2.00-2.50
Ni (%) 10.0-13.0 10.5-13.5
N (%) <=0.10 Not specified
B (%) 0.0015-0.0050 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X6CrNiMoB17-12-2 Be Substituted With EN 10088-1 X6CrNiMoTi17-12-2?
EN 10088-1 X6CrNiMoB17-12-2 and EN 10088-1 X6CrNiMoTi17-12-2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X6CrNiMoB17-12-2
0 active listings and RFQs →
EN 10088-1 X6CrNiMoTi17-12-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X6CrNiMoB17-12-2 and EN 10088-1 X6CrNiMoTi17-12-2?
EN 10088-1 X6CrNiMoB17-12-2 specifies N, B which are not specified for EN 10088-1 X6CrNiMoTi17-12-2.
Can EN 10088-1 X6CrNiMoB17-12-2 be substituted with EN 10088-1 X6CrNiMoTi17-12-2?
EN 10088-1 X6CrNiMoB17-12-2 and EN 10088-1 X6CrNiMoTi17-12-2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.