Post Stock Login Register

EN 10088-1 X6CrNiMoTiB17-13 vs EN 10088-1 X6CrNiMoB17-12-2

Strong Match — 85% match based on chemical composition and mechanical property overlap.

EN 10088-1 X6CrNiMoTiB17-13 (EN 10088-1:2014) and EN 10088-1 X6CrNiMoB17-12-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X6CrNiMoTiB17-13 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X6CrNiMoB17-12-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X6CrNiMoTiB17-13 vs EN 10088-1 X6CrNiMoB17-12-2 is a 85% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85%.

Frequently Compared With EN 10088-1 X6CrNiMoTiB17-13:
GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
85%
MECHANICAL MATCH
No shared data
OVERALL
85%
Specifications
Property EN 10088-1 X6CrNiMoTiB17-13 EN 10088-1 X6CrNiMoB17-12-2
Standard EN 10088-1:2014 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.04-0.08 0.04-0.08
Si (%) <=0.75 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.035 <=0.035
S (%) <=0.015 <=0.015
Cr (%) 16.0-18.0 16.5-18.5
Mo (%) 2.00-2.50 2.00-2.50
Ni (%) 12.0-14.0 10.0-13.0
B (%) 0.0015-0.0060 0.0015-0.0050
N (%) Not specified <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X6CrNiMoTiB17-13 Be Substituted With EN 10088-1 X6CrNiMoB17-12-2?
EN 10088-1 X6CrNiMoTiB17-13 and EN 10088-1 X6CrNiMoB17-12-2 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X6CrNiMoB17-12-2 is often considered as a substitute for EN 10088-1 X6CrNiMoTiB17-13 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X6CrNiMoTiB17-13
0 active listings and RFQs →
EN 10088-1 X6CrNiMoB17-12-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X6CrNiMoTiB17-13 and EN 10088-1 X6CrNiMoB17-12-2?
EN 10088-1 X6CrNiMoB17-12-2 specifies N which is not specified for EN 10088-1 X6CrNiMoTiB17-13.
Can EN 10088-1 X6CrNiMoTiB17-13 be substituted with EN 10088-1 X6CrNiMoB17-12-2?
EN 10088-1 X6CrNiMoTiB17-13 and EN 10088-1 X6CrNiMoB17-12-2 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X6CrNiMoB17-12-2 is often considered as a substitute for EN 10088-1 X6CrNiMoTiB17-13 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.