Post Stock Login Register

EN 10088-1 X6NiCrSiNCe35-25 vs EN 10088-1 X8CrNi25-21

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X6NiCrSiNCe35-25 (EN 10088-1:2014) and EN 10088-1 X8CrNi25-21 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X6NiCrSiNCe35-25 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X8CrNi25-21 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X6NiCrSiNCe35-25 vs EN 10088-1 X8CrNi25-21 is a 76.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With EN 10088-1 X6NiCrSiNCe35-25:
EN 10088-1 1.4845 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoVH GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
76.1%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property EN 10088-1 X6NiCrSiNCe35-25 EN 10088-1 X8CrNi25-21
Standard EN 10088-1:2014 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.04-0.08 <=0.10
Si (%) 1.20-2.00 <=1.50
Mn (%) <=2.00 <=2.00
P (%) <=0.040 <=0.045
S (%) <=0.015 <=0.015
Cr (%) 24.0-26.0 24.0-26.0
Ni (%) 34.0-36.0 19.0-22.0
N (%) 0.12-0.20 <=0.10
Ce (%) 0.03-0.08 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X6NiCrSiNCe35-25
Not documented
EN 10088-1 X8CrNi25-21
Furnace parts, heat exchangers, kiln furniture
Key Differences
Can EN 10088-1 X6NiCrSiNCe35-25 Be Substituted With EN 10088-1 X8CrNi25-21?
EN 10088-1 X6NiCrSiNCe35-25 and EN 10088-1 X8CrNi25-21 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10088-1 X6NiCrSiNCe35-25
No active listings currently.
EN 10088-1 X8CrNi25-21
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2700–3200 mm (106.3–125.98 in)
On M-EX Right Now
EN 10088-1 X6NiCrSiNCe35-25
0 active listings and RFQs →
EN 10088-1 X8CrNi25-21
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X6NiCrSiNCe35-25 and EN 10088-1 X8CrNi25-21?
EN 10088-1 X6NiCrSiNCe35-25 specifies Ce which is not specified for EN 10088-1 X8CrNi25-21.
Can EN 10088-1 X6NiCrSiNCe35-25 be substituted with EN 10088-1 X8CrNi25-21?
EN 10088-1 X6NiCrSiNCe35-25 and EN 10088-1 X8CrNi25-21 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.