Post Stock Login Register

EN 10088-1 X7CrNiTi18-10 vs EN 10088-1 X7CrNiNb18-10

Strong Match — 92.1% match based on chemical composition and mechanical property overlap.

EN 10088-1 X7CrNiTi18-10 (EN 10088-1:2014) and EN 10088-1 X7CrNiNb18-10 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X7CrNiTi18-10 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X7CrNiNb18-10 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X7CrNiTi18-10 vs EN 10088-1 X7CrNiNb18-10 is a 92.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 92.1%.

Frequently Compared With EN 10088-1 X7CrNiTi18-10:
GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
92.1%
MECHANICAL MATCH
No shared data
OVERALL
92.1%
Specifications
Property EN 10088-1 X7CrNiTi18-10 EN 10088-1 X7CrNiNb18-10
Standard EN 10088-1:2014 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) 0.04-0.08 0.04-0.10
Si (%) <=1.00 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.040 <=0.045
S (%) <=0.015 <=0.015
Cr (%) 17.0-19.0 17.0-19.0
Ni (%) 9.0-13.0 9.0-12.0
N (%) <=0.10 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X7CrNiTi18-10 Be Substituted With EN 10088-1 X7CrNiNb18-10?
EN 10088-1 X7CrNiTi18-10 and EN 10088-1 X7CrNiNb18-10 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X7CrNiNb18-10 is often considered as a substitute for EN 10088-1 X7CrNiTi18-10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X7CrNiTi18-10
0 active listings and RFQs →
EN 10088-1 X7CrNiNb18-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X7CrNiTi18-10 and EN 10088-1 X7CrNiNb18-10?
EN 10088-1 X7CrNiTi18-10 specifies N which is not specified for EN 10088-1 X7CrNiNb18-10.
Can EN 10088-1 X7CrNiTi18-10 be substituted with EN 10088-1 X7CrNiNb18-10?
EN 10088-1 X7CrNiTi18-10 and EN 10088-1 X7CrNiNb18-10 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X7CrNiNb18-10 is often considered as a substitute for EN 10088-1 X7CrNiTi18-10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.