Post Stock Login Register

EN 10088-1 X8CrNiMoVNb16-13 vs ASTM A240/A240M S31609

Related Material — 64.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X8CrNiMoVNb16-13 (EN 10088-1:2014) and ASTM A240/A240M S31609 (ASTM A240/A240M:2025) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X8CrNiMoVNb16-13 is defined under European Standard (EN), originating from Europe, while ASTM A240/A240M S31609 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X8CrNiMoVNb16-13 vs ASTM A240/A240M S31609 is a 64.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 64.9%.

Frequently Compared With EN 10088-1 X8CrNiMoVNb16-13:
GOST 5632 08X18H10 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
64.9%
MECHANICAL MATCH
No shared data
OVERALL
64.9%
Specifications
Property EN 10088-1 X8CrNiMoVNb16-13 ASTM A240/A240M S31609
Standard EN 10088-1:2014 ASTM A240/A240M:2025
Category Stainless Steel Stainless Steel
C (%) 0.04-0.10 0.04-0.10
Si (%) 0.30-0.60 <=0.75
Mn (%) <=1.50 <=2.00
P (%) <=0.035 <=0.045
S (%) <=0.015 <=0.030
Cr (%) 15.5-17.5 16.0-18.0
Mo (%) 1.10-1.50 2.00-3.00
Ni (%) 12.5-14.5 10.0-14.0
N (%) 0.06-0.14 Not specified
V (%) 0.60-0.85 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X8CrNiMoVNb16-13 ASTM A240/A240M S31609
Tensile Strength Not specified >=515 MPa
Yield Strength Not specified >=205 MPa
Elongation Not specified >=40%
Hardness Not specified <=217 HB
Condition Not specified Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
EN 10088-1 X8CrNiMoVNb16-13
Not documented
ASTM A240/A240M S31609
Pressure vessels and general applications (plate, sheet and strip)
Key Differences
Can EN 10088-1 X8CrNiMoVNb16-13 Be Substituted With ASTM A240/A240M S31609?
EN 10088-1 X8CrNiMoVNb16-13 and ASTM A240/A240M S31609 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X8CrNiMoVNb16-13
0 active listings and RFQs →
ASTM A240/A240M S31609
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X8CrNiMoVNb16-13 and ASTM A240/A240M S31609?
EN 10088-1 X8CrNiMoVNb16-13 specifies N, V which are not specified for ASTM A240/A240M S31609.
Can EN 10088-1 X8CrNiMoVNb16-13 be substituted with ASTM A240/A240M S31609?
EN 10088-1 X8CrNiMoVNb16-13 and ASTM A240/A240M S31609 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.