Post Stock Login Register

EN 10088-1 X10CrMoVNb9-1 vs EN 10088-1 X11CrMoWVNb9-1-1

Close Alternative — 71.6% match based on chemical composition and mechanical property overlap.

EN 10088-1 X10CrMoVNb9-1 (EN 10088-1:2023) and EN 10088-1 X11CrMoWVNb9-1-1 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X10CrMoVNb9-1 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X11CrMoWVNb9-1-1 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X10CrMoVNb9-1 vs EN 10088-1 X11CrMoWVNb9-1-1 is a 71.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 71.6%.

Frequently Compared With EN 10088-1 X10CrMoVNb9-1:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
71.6%
MECHANICAL MATCH
No shared data
OVERALL
71.6%
Specifications
Property EN 10088-1 X10CrMoVNb9-1 EN 10088-1 X11CrMoWVNb9-1-1
Standard EN 10088-1:2023 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.08-0.12 0.09-0.13
Si (%) <=0.50 0.10-0.50
Mn (%) 0.30-0.60 0.30-0.60
P (%) <=0.025 <=0.020
S (%) <=0.015 <=0.010
Cr (%) 8.0-9.5 8.5-9.5
Mo (%) 0.85-1.05 0.90-1.10
Ni (%) <=0.40 0.10-0.40
N (%) 0.030-0.070 0.050-0.090
Al (%) <=0.040 <=0.040
Nb (%) 0.060-0.10 0.060-0.10
V (%) 0.18-0.25 0.18-0.25
W (%) Not specified 0.90-1.10
B (%) Not specified 0.0005-0.0050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X10CrMoVNb9-1 Be Substituted With EN 10088-1 X11CrMoWVNb9-1-1?
EN 10088-1 X10CrMoVNb9-1 and EN 10088-1 X11CrMoWVNb9-1-1 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X10CrMoVNb9-1
0 active listings and RFQs →
EN 10088-1 X11CrMoWVNb9-1-1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X10CrMoVNb9-1 and EN 10088-1 X11CrMoWVNb9-1-1?
EN 10088-1 X11CrMoWVNb9-1-1 specifies W, B which are not specified for EN 10088-1 X10CrMoVNb9-1.
Can EN 10088-1 X10CrMoVNb9-1 be substituted with EN 10088-1 X11CrMoWVNb9-1-1?
EN 10088-1 X10CrMoVNb9-1 and EN 10088-1 X11CrMoWVNb9-1-1 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.