Post Stock Login Register

EN 10088-1 X10CrNiMoMnNbVB15-10-1 vs ASTM A240/A240M S30926

Related Material — 59.3% match based on chemical composition and mechanical property overlap.

EN 10088-1 X10CrNiMoMnNbVB15-10-1 (EN 10088-1:2023) and ASTM A240/A240M S30926 (ASTM A240/A240M:2025) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X10CrNiMoMnNbVB15-10-1 is defined under European Standard (EN), originating from Europe, while ASTM A240/A240M S30926 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X10CrNiMoMnNbVB15-10-1 vs ASTM A240/A240M S30926 is a 59.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 59.3%.

Frequently Compared With EN 10088-1 X10CrNiMoMnNbVB15-10-1:
ASTM A959 .- EN 10088-1 1.4401 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
59.3%
MECHANICAL MATCH
No shared data
OVERALL
59.3%
Specifications
Property EN 10088-1 X10CrNiMoMnNbVB15-10-1 ASTM A240/A240M S30926
Standard EN 10088-1:2023 ASTM A240/A240M:2025
Category Stainless Steel Stainless Steel
C (%) 0.07-0.13 <=0.10
Si (%) <=1.00 <=1.00
Mn (%) 5.5-7.0 5.0-7.0
P (%) <=0.040 <=0.045
S (%) <=0.030 <=0.030
Cr (%) 14.0-16.0 22.5-24.5
Mo (%) 0.80-1.20 1.00-3.00
Ni (%) 9.0-11.0 9.0-11.0
N (%) <=0.10 0.40-0.60
Nb (%) 0.75-1.25 Not specified
V (%) 0.15-0.40 0.03-0.30
B (%) 0.003-0.009 <=0.010
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X10CrNiMoMnNbVB15-10-1 ASTM A240/A240M S30926
Tensile Strength Not specified >=800 MPa
Yield Strength Not specified >=400 MPa
Elongation Not specified >=35%
Condition Not specified Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
EN 10088-1 X10CrNiMoMnNbVB15-10-1
Not documented
ASTM A240/A240M S30926
Pressure vessels and general applications (plate, sheet and strip)
Key Differences
Can EN 10088-1 X10CrNiMoMnNbVB15-10-1 Be Substituted With ASTM A240/A240M S30926?
EN 10088-1 X10CrNiMoMnNbVB15-10-1 and ASTM A240/A240M S30926 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X10CrNiMoMnNbVB15-10-1
0 active listings and RFQs →
ASTM A240/A240M S30926
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X10CrNiMoMnNbVB15-10-1 and ASTM A240/A240M S30926?
EN 10088-1 X10CrNiMoMnNbVB15-10-1 specifies Nb which is not specified for ASTM A240/A240M S30926.
Can EN 10088-1 X10CrNiMoMnNbVB15-10-1 be substituted with ASTM A240/A240M S30926?
EN 10088-1 X10CrNiMoMnNbVB15-10-1 and ASTM A240/A240M S30926 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.