Post Stock Login Register

EN 10088-1 X10NiCrSi35-19 vs EN 10088-1 X12NiCrSi35-16

Strong Match — 90.7% match based on chemical composition and mechanical property overlap.

EN 10088-1 X10NiCrSi35-19 (EN 10088-1:2023) and EN 10088-1 X12NiCrSi35-16 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X10NiCrSi35-19 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X12NiCrSi35-16 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X10NiCrSi35-19 vs EN 10088-1 X12NiCrSi35-16 is a 90.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 90.7%.

Frequently Compared With EN 10088-1 X10NiCrSi35-19:
ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401 EN 10088-1 1.4845 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoH GOST 5632 06Kh23N28 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
90.7%
MECHANICAL MATCH
No shared data
OVERALL
90.7%
Specifications
Property EN 10088-1 X10NiCrSi35-19 EN 10088-1 X12NiCrSi35-16
Standard EN 10088-1:2023 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.15 <=0.15
Si (%) 1.00-2.00 1.00-2.00
Mn (%) <=2.00 <=2.00
P (%) <=0.030 <=0.045
S (%) <=0.015 <=0.015
Cr (%) 17.0-20.0 15.0-17.0
Ni (%) 33.0-37.0 33.0-37.0
N (%) <=0.10 <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can EN 10088-1 X10NiCrSi35-19 Be Substituted With EN 10088-1 X12NiCrSi35-16?
EN 10088-1 X10NiCrSi35-19 and EN 10088-1 X12NiCrSi35-16 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X12NiCrSi35-16 is often considered as a substitute for EN 10088-1 X10NiCrSi35-19 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X10NiCrSi35-19
0 active listings and RFQs →
EN 10088-1 X12NiCrSi35-16
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X10NiCrSi35-19 and EN 10088-1 X12NiCrSi35-16?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X10NiCrSi35-19 be substituted with EN 10088-1 X12NiCrSi35-16?
EN 10088-1 X10NiCrSi35-19 and EN 10088-1 X12NiCrSi35-16 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X12NiCrSi35-16 is often considered as a substitute for EN 10088-1 X10NiCrSi35-19 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.