Post Stock Login Register

EN 10088-1 X10NiCrSiNb35-22 vs ASTM A240/A240M S30100

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X10NiCrSiNb35-22 (EN 10088-1:2023) and ASTM A240/A240M S30100 (ASTM A240/A240M:2025) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X10NiCrSiNb35-22 is defined under European Standard (EN), originating from Europe, while ASTM A240/A240M S30100 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X10NiCrSiNb35-22 vs ASTM A240/A240M S30100 is a 69.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With EN 10088-1 X10NiCrSiNb35-22:
GB/T 3280 06Cr19Ni10 EN 10088-1 1.4301 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
69.9%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property EN 10088-1 X10NiCrSiNb35-22 ASTM A240/A240M S30100
Standard EN 10088-1:2023 ASTM A240/A240M:2025
Category Stainless Steel Stainless Steel
C (%) <=0.15 <=0.15
Si (%) 1.00-2.00 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.030 <=0.045
S (%) <=0.015 <=0.030
Cr (%) 20.0-23.0 16.0-18.0
Ni (%) 33.0-37.0 6.0-8.0
N (%) <=0.10 <=0.10
Nb (%) 1.00-1.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X10NiCrSiNb35-22 ASTM A240/A240M S30100
Tensile Strength Not specified >=515 MPa
Yield Strength Not specified >=205 MPa
Elongation Not specified >=40%
Hardness Not specified <=217 HB
Condition Not specified Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
EN 10088-1 X10NiCrSiNb35-22
Not documented
ASTM A240/A240M S30100
Pressure vessels and general applications (plate, sheet and strip)
Key Differences
Can EN 10088-1 X10NiCrSiNb35-22 Be Substituted With ASTM A240/A240M S30100?
EN 10088-1 X10NiCrSiNb35-22 and ASTM A240/A240M S30100 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X10NiCrSiNb35-22
0 active listings and RFQs →
ASTM A240/A240M S30100
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X10NiCrSiNb35-22 and ASTM A240/A240M S30100?
EN 10088-1 X10NiCrSiNb35-22 specifies Nb which is not specified for ASTM A240/A240M S30100.
Can EN 10088-1 X10NiCrSiNb35-22 be substituted with ASTM A240/A240M S30100?
EN 10088-1 X10NiCrSiNb35-22 and ASTM A240/A240M S30100 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.