Post Stock Login Register

EN 10088-1 X15CrNiSi20-12 vs ASTM A276/A276M S30800

Close Alternative — 79.7% match based on chemical composition and mechanical property overlap.

EN 10088-1 X15CrNiSi20-12 (EN 10088-1:2023) and ASTM A276/A276M S30800 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X15CrNiSi20-12 is defined under European Standard (EN), originating from Europe, while ASTM A276/A276M S30800 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X15CrNiSi20-12 vs ASTM A276/A276M S30800 is a 79.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 79.7%.

Frequently Compared With EN 10088-1 X15CrNiSi20-12:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
79.7%
MECHANICAL MATCH
No shared data
OVERALL
79.7%
Specifications
Property EN 10088-1 X15CrNiSi20-12 ASTM A276/A276M S30800
Standard EN 10088-1:2023 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) <=0.20 <=0.08
Si (%) 1.50-2.50 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.015 <=0.030
Cr (%) 19.0-21.0 19.0-21.0
Ni (%) 11.0-13.0 10.0-12.0
N (%) <=0.10 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X15CrNiSi20-12 ASTM A276/A276M S30800
Tensile Strength Not specified >=515 MPa
Yield Strength Not specified >=205 MPa
Elongation Not specified >=40%
Condition Not specified Condition A (Annealed), hot-finished, all sizes (first row printed)
Typical Applications
EN 10088-1 X15CrNiSi20-12
Not documented
ASTM A276/A276M S30800
Stainless steel bars and shapes (hot-finished or cold-finished)
Key Differences
Can EN 10088-1 X15CrNiSi20-12 Be Substituted With ASTM A276/A276M S30800?
EN 10088-1 X15CrNiSi20-12 and ASTM A276/A276M S30800 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X15CrNiSi20-12
0 active listings and RFQs →
ASTM A276/A276M S30800
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X15CrNiSi20-12 and ASTM A276/A276M S30800?
EN 10088-1 X15CrNiSi20-12 specifies N which is not specified for ASTM A276/A276M S30800.
Can EN 10088-1 X15CrNiSi20-12 be substituted with ASTM A276/A276M S30800?
EN 10088-1 X15CrNiSi20-12 and ASTM A276/A276M S30800 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.