Post Stock Login Register

EN 10088-1 X19CrMoNbVN11-1 vs EN 10088-1 X22CrMoV12-1

Related Material — 55.8% match based on chemical composition and mechanical property overlap.

EN 10088-1 X19CrMoNbVN11-1 (EN 10088-1:2023) and EN 10088-1 X22CrMoV12-1 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X19CrMoNbVN11-1 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X22CrMoV12-1 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X19CrMoNbVN11-1 vs EN 10088-1 X22CrMoV12-1 is a 55.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 55.8%.

Frequently Compared With EN 10088-1 X19CrMoNbVN11-1:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
55.8%
MECHANICAL MATCH
No shared data
OVERALL
55.8%
Specifications
Property EN 10088-1 X19CrMoNbVN11-1 EN 10088-1 X22CrMoV12-1
Standard EN 10088-1:2023 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) 0.17-0.23 0.18-0.24
Si (%) <=0.50 <=0.50
Mn (%) 0.40-0.90 0.40-0.90
P (%) <=0.025 <=0.025
S (%) <=0.015 <=0.015
Cr (%) 10.0-11.5 11.0-12.5
Mo (%) 0.50-0.80 0.80-1.20
Ni (%) 0.20-0.60 0.30-0.80
N (%) 0.050-0.10 Not specified
Al (%) <=0.020 Not specified
Nb (%) 0.25-0.55 Not specified
V (%) 0.10-0.30 0.25-0.35
B (%) <=0.0015 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X19CrMoNbVN11-1 Be Substituted With EN 10088-1 X22CrMoV12-1?
EN 10088-1 X19CrMoNbVN11-1 and EN 10088-1 X22CrMoV12-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X19CrMoNbVN11-1
0 active listings and RFQs →
EN 10088-1 X22CrMoV12-1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X19CrMoNbVN11-1 and EN 10088-1 X22CrMoV12-1?
EN 10088-1 X19CrMoNbVN11-1 specifies N, Al, Nb, B which are not specified for EN 10088-1 X22CrMoV12-1.
Can EN 10088-1 X19CrMoNbVN11-1 be substituted with EN 10088-1 X22CrMoV12-1?
EN 10088-1 X19CrMoNbVN11-1 and EN 10088-1 X22CrMoV12-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.