Post Stock Login Register

EN 10088-1 X1CrNiMoAlTi12-9-2 vs EN 10088-1 X1CrNiMoAlTi12-10-2

Strong Match — 86.2% match based on chemical composition and mechanical property overlap.

EN 10088-1 X1CrNiMoAlTi12-9-2 (EN 10088-1:2023) and EN 10088-1 X1CrNiMoAlTi12-10-2 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X1CrNiMoAlTi12-9-2 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X1CrNiMoAlTi12-10-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X1CrNiMoAlTi12-9-2 vs EN 10088-1 X1CrNiMoAlTi12-10-2 is a 86.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 86.2%.

Frequently Compared With EN 10088-1 X1CrNiMoAlTi12-9-2:
GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
86.2%
MECHANICAL MATCH
No shared data
OVERALL
86.2%
Specifications
Property EN 10088-1 X1CrNiMoAlTi12-9-2 EN 10088-1 X1CrNiMoAlTi12-10-2
Standard EN 10088-1:2023 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.015 <=0.015
Si (%) <=0.10 <=0.10
Mn (%) <=0.10 <=0.10
P (%) <=0.010 <=0.010
S (%) <=0.005 <=0.005
Cr (%) 11.5-12.5 11.5-12.5
Mo (%) 1.85-2.15 1.85-2.15
Ni (%) 8.5-9.5 9.2-10.2
Al (%) 0.60-0.80 0.80-1.10
Ti (%) 0.28-0.37 0.28-0.40
N (%) <=0.010 <=0.020
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can EN 10088-1 X1CrNiMoAlTi12-9-2 Be Substituted With EN 10088-1 X1CrNiMoAlTi12-10-2?
EN 10088-1 X1CrNiMoAlTi12-9-2 and EN 10088-1 X1CrNiMoAlTi12-10-2 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X1CrNiMoAlTi12-10-2 is often considered as a substitute for EN 10088-1 X1CrNiMoAlTi12-9-2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X1CrNiMoAlTi12-9-2
0 active listings and RFQs →
EN 10088-1 X1CrNiMoAlTi12-10-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X1CrNiMoAlTi12-9-2 and EN 10088-1 X1CrNiMoAlTi12-10-2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X1CrNiMoAlTi12-9-2 be substituted with EN 10088-1 X1CrNiMoAlTi12-10-2?
EN 10088-1 X1CrNiMoAlTi12-9-2 and EN 10088-1 X1CrNiMoAlTi12-10-2 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X1CrNiMoAlTi12-10-2 is often considered as a substitute for EN 10088-1 X1CrNiMoAlTi12-9-2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.