Post Stock Login Register

EN 10088-1 X2CrCuNiN23-2-2 vs ASTM A240/A240M S32202

Close Alternative — 82.5% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrCuNiN23-2-2 (EN 10088-1:2023) and ASTM A240/A240M S32202 (ASTM A240/A240M:2025) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrCuNiN23-2-2 is defined under European Standard (EN), originating from Europe, while ASTM A240/A240M S32202 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X2CrCuNiN23-2-2 vs ASTM A240/A240M S32202 is a 82.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 82.5%.

Frequently Compared With EN 10088-1 X2CrCuNiN23-2-2:
GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr13H EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- GOST 5632 06Kh23N28
Match Breakdown
CHEMISTRY MATCH
82.5%
MECHANICAL MATCH
No shared data
OVERALL
82.5%
Specifications
Property EN 10088-1 X2CrCuNiN23-2-2 ASTM A240/A240M S32202
Standard EN 10088-1:2023 ASTM A240/A240M:2025
Category Stainless Steel Stainless Steel
C (%) <=0.045 <=0.030
Si (%) <=1.00 <=1.00
Mn (%) 1.00-3.00 <=2.00
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.010
Cr (%) 21.5-24.0 21.5-24.0
Mo (%) <=0.50 <=0.45
Ni (%) 1.00-3.00 1.00-2.80
N (%) 0.12-0.20 0.18-0.26
Cu (%) 1.60-3.00 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X2CrCuNiN23-2-2 ASTM A240/A240M S32202
Tensile Strength Not specified >=650 MPa
Yield Strength Not specified >=450 MPa
Elongation Not specified >=30%
Hardness Not specified <=290 HB
Condition Not specified Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
EN 10088-1 X2CrCuNiN23-2-2
Not documented
ASTM A240/A240M S32202
Pressure vessels and general applications (plate, sheet and strip)
Key Differences
Can EN 10088-1 X2CrCuNiN23-2-2 Be Substituted With ASTM A240/A240M S32202?
EN 10088-1 X2CrCuNiN23-2-2 and ASTM A240/A240M S32202 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X2CrCuNiN23-2-2
0 active listings and RFQs →
ASTM A240/A240M S32202
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrCuNiN23-2-2 and ASTM A240/A240M S32202?
EN 10088-1 X2CrCuNiN23-2-2 specifies Cu which is not specified for ASTM A240/A240M S32202.
Can EN 10088-1 X2CrCuNiN23-2-2 be substituted with ASTM A240/A240M S32202?
EN 10088-1 X2CrCuNiN23-2-2 and ASTM A240/A240M S32202 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.