Strong Match — 95.6% match
based on chemical composition and mechanical property overlap.
EN 10088-1 X2CrMnNiN21-5-1 (EN 10088-1:2023) and ASTM A959 S32101 (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 X2CrMnNiN21-5-1 is defined under European Standard (EN), originating from Europe, while ASTM A959 S32101 is defined under ASTM International, originating from United States.
As per chemical composition, EN 10088-1 X2CrMnNiN21-5-1 vs ASTM A959 S32101 is a 95.6% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 95.6%.
Frequently Compared With EN 10088-1 X2CrMnNiN21-5-1:
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X2CrMnNiN21-5-1
Not documented
ASTM A959 S32101
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can EN 10088-1 X2CrMnNiN21-5-1 Be Substituted With ASTM A959 S32101?
EN 10088-1 X2CrMnNiN21-5-1 and ASTM A959 S32101 overlap closely enough on chemistry and mechanical properties that ASTM A959 S32101 is often considered as a substitute for EN 10088-1 X2CrMnNiN21-5-1 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between EN 10088-1 X2CrMnNiN21-5-1 and ASTM A959 S32101?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X2CrMnNiN21-5-1 be substituted with ASTM A959 S32101?
EN 10088-1 X2CrMnNiN21-5-1 and ASTM A959 S32101 overlap closely enough on chemistry and mechanical properties that ASTM A959 S32101 is often considered as a substitute for EN 10088-1 X2CrMnNiN21-5-1 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.