Post Stock Login Register

EN 10088-1 X2CrNiCu19-10 vs EN 10088-1 X2CrNi19-11

Strong Match — 85.8% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrNiCu19-10 (EN 10088-1:2023) and EN 10088-1 X2CrNi19-11 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrNiCu19-10 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X2CrNi19-11 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X2CrNiCu19-10 vs EN 10088-1 X2CrNi19-11 is a 85.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85.8%.

Frequently Compared With EN 10088-1 X2CrNiCu19-10:
EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
85.8%
MECHANICAL MATCH
No shared data
OVERALL
85.8%
Specifications
Property EN 10088-1 X2CrNiCu19-10 EN 10088-1 X2CrNi19-11
Standard EN 10088-1:2023 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.015 <=0.015
Cr (%) 18.5-20.0 18.0-20.0
Ni (%) 9.0-10.0 10.0-12.0
N (%) <=0.08 <=0.10
Cu (%) <=1.00 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X2CrNiCu19-10 Be Substituted With EN 10088-1 X2CrNi19-11?
EN 10088-1 X2CrNiCu19-10 and EN 10088-1 X2CrNi19-11 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNi19-11 is often considered as a substitute for EN 10088-1 X2CrNiCu19-10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X2CrNiCu19-10
0 active listings and RFQs →
EN 10088-1 X2CrNi19-11
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrNiCu19-10 and EN 10088-1 X2CrNi19-11?
EN 10088-1 X2CrNiCu19-10 specifies Cu which is not specified for EN 10088-1 X2CrNi19-11.
Can EN 10088-1 X2CrNiCu19-10 be substituted with EN 10088-1 X2CrNi19-11?
EN 10088-1 X2CrNiCu19-10 and EN 10088-1 X2CrNi19-11 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNi19-11 is often considered as a substitute for EN 10088-1 X2CrNiCu19-10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.