Post Stock Login Register

EN 10088-1 X2CrNiMnMoCuN21-3-1-1 vs ASTM A276/A276M N08367

Related Material — 56% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrNiMnMoCuN21-3-1-1 (EN 10088-1:2023) and ASTM A276/A276M N08367 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrNiMnMoCuN21-3-1-1 is defined under European Standard (EN), originating from Europe, while ASTM A276/A276M N08367 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X2CrNiMnMoCuN21-3-1-1 vs ASTM A276/A276M N08367 is a 56% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 56%.

Frequently Compared With EN 10088-1 X2CrNiMnMoCuN21-3-1-1:
ASTM A959 .- EN 10088-1 1.4401 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
56%
MECHANICAL MATCH
No shared data
OVERALL
56%
Specifications
Property EN 10088-1 X2CrNiMnMoCuN21-3-1-1 ASTM A276/A276M N08367
Standard EN 10088-1:2023 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) 0.015-0.030 <=0.030
Si (%) 0.30-0.50 <=1.00
Mn (%) 1.05-1.30 <=2.00
P (%) <=0.035 <=0.040
S (%) <=0.05 <=0.030
Cr (%) 19.9-20.3 20.0-22.0
Mo (%) 1.15-1.30 6.0-7.0
Ni (%) 2.65-3.00 23.5-25.5
N (%) 0.18-0.21 0.18-0.25
Cu (%) 0.30-0.50 <=0.75
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X2CrNiMnMoCuN21-3-1-1 ASTM A276/A276M N08367
Tensile Strength Not specified >=655 MPa
Yield Strength Not specified >=310 MPa
Elongation Not specified >=30%
Condition Not specified Condition A (Annealed), hot-finished or cold-finished, all sizes (first row printed)
Typical Applications
EN 10088-1 X2CrNiMnMoCuN21-3-1-1
Not documented
ASTM A276/A276M N08367
Stainless steel bars and shapes (hot-finished or cold-finished)
Can EN 10088-1 X2CrNiMnMoCuN21-3-1-1 Be Substituted With ASTM A276/A276M N08367?
EN 10088-1 X2CrNiMnMoCuN21-3-1-1 and ASTM A276/A276M N08367 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X2CrNiMnMoCuN21-3-1-1
0 active listings and RFQs →
ASTM A276/A276M N08367
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrNiMnMoCuN21-3-1-1 and ASTM A276/A276M N08367?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X2CrNiMnMoCuN21-3-1-1 be substituted with ASTM A276/A276M N08367?
EN 10088-1 X2CrNiMnMoCuN21-3-1-1 and ASTM A276/A276M N08367 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.