Post Stock Login Register

EN 10088-1 X2CrNiMo18-15-4 vs ASTM A959 317L

Strong Match — 87.5% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrNiMo18-15-4 (EN 10088-1:2023) and ASTM A959 317L (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrNiMo18-15-4 is defined under European Standard (EN), originating from Europe, while ASTM A959 317L is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X2CrNiMo18-15-4 vs ASTM A959 317L is a 87.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 87.5%.

Frequently Compared With EN 10088-1 X2CrNiMo18-15-4:
ASTM A959 .- GOST 5632 06Kh23N28 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
87.5%
MECHANICAL MATCH
No shared data
OVERALL
87.5%
Specifications
Property EN 10088-1 X2CrNiMo18-15-4 ASTM A959 317L
Standard EN 10088-1:2023 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.015 <=0.030
Cr (%) 17.5-19.5 18.0-20.0
Mo (%) 3.00-4.0 3.0-4.0
Ni (%) 13.0-16.0 11.0-15.0
N (%) <=0.10 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X2CrNiMo18-15-4
Not documented
ASTM A959 317L
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can EN 10088-1 X2CrNiMo18-15-4 Be Substituted With ASTM A959 317L?
EN 10088-1 X2CrNiMo18-15-4 and ASTM A959 317L overlap closely enough on chemistry and mechanical properties that ASTM A959 317L is often considered as a substitute for EN 10088-1 X2CrNiMo18-15-4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X2CrNiMo18-15-4
0 active listings and RFQs →
ASTM A959 317L
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrNiMo18-15-4 and ASTM A959 317L?
EN 10088-1 X2CrNiMo18-15-4 specifies N which is not specified for ASTM A959 317L.
Can EN 10088-1 X2CrNiMo18-15-4 be substituted with ASTM A959 317L?
EN 10088-1 X2CrNiMo18-15-4 and ASTM A959 317L overlap closely enough on chemistry and mechanical properties that ASTM A959 317L is often considered as a substitute for EN 10088-1 X2CrNiMo18-15-4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.