Post Stock Login Register

EN 10088-1 X2CrNiMoCoN28-8-5-1 vs ASTM A959 S32950

Related Material — 68.1% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrNiMoCoN28-8-5-1 (EN 10088-1:2023) and ASTM A959 S32950 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrNiMoCoN28-8-5-1 is defined under European Standard (EN), originating from Europe, while ASTM A959 S32950 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X2CrNiMoCoN28-8-5-1 vs ASTM A959 S32950 is a 68.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 68.1%.

Frequently Compared With EN 10088-1 X2CrNiMoCoN28-8-5-1:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
68.1%
MECHANICAL MATCH
No shared data
OVERALL
68.1%
Specifications
Property EN 10088-1 X2CrNiMoCoN28-8-5-1 ASTM A959 S32950
Standard EN 10088-1:2023 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Si (%) <=0.50 <=0.60
Mn (%) <=1.50 <=2.00
P (%) <=0.035 <=0.035
S (%) <=0.010 <=0.010
Cr (%) 26.0-29.0 26.0-29.0
Mo (%) 4.0-5.0 1.00-2.50
Ni (%) 5.5-9.5 3.5-5.2
N (%) 0.30-0.50 0.15-0.35
Cu (%) <=1.00 Not specified
Co (%) 0.50-2.00 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X2CrNiMoCoN28-8-5-1
Not documented
ASTM A959 S32950
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can EN 10088-1 X2CrNiMoCoN28-8-5-1 Be Substituted With ASTM A959 S32950?
EN 10088-1 X2CrNiMoCoN28-8-5-1 and ASTM A959 S32950 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X2CrNiMoCoN28-8-5-1
0 active listings and RFQs →
ASTM A959 S32950
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrNiMoCoN28-8-5-1 and ASTM A959 S32950?
EN 10088-1 X2CrNiMoCoN28-8-5-1 specifies Cu, Co which are not specified for ASTM A959 S32950.
Can EN 10088-1 X2CrNiMoCoN28-8-5-1 be substituted with ASTM A959 S32950?
EN 10088-1 X2CrNiMoCoN28-8-5-1 and ASTM A959 S32950 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.