Post Stock Login Register

EN 10088-1 X2CrNiMoCoN28-8-5-1 vs EN 10088-1 X2CrNiMoCoN28-8-5-1

Strong Match — 100% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrNiMoCoN28-8-5-1 (EN 10088-1:2023) and EN 10088-1 X2CrNiMoCoN28-8-5-1 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrNiMoCoN28-8-5-1 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X2CrNiMoCoN28-8-5-1 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X2CrNiMoCoN28-8-5-1 vs EN 10088-1 X2CrNiMoCoN28-8-5-1 is a 100% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 100%.

Frequently Compared With EN 10088-1 X2CrNiMoCoN28-8-5-1:
GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
No shared data
OVERALL
100%
Specifications
Property EN 10088-1 X2CrNiMoCoN28-8-5-1 EN 10088-1 X2CrNiMoCoN28-8-5-1
Standard EN 10088-1:2023 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Si (%) <=0.50 <=0.50
Mn (%) <=1.50 <=1.50
P (%) <=0.035 <=0.035
S (%) <=0.010 <=0.010
Cr (%) 26.0-29.0 26.0-29.0
Mo (%) 4.0-5.0 4.0-5.0
Ni (%) 5.5-9.5 5.5-9.5
N (%) 0.30-0.50 0.30-0.50
Cu (%) <=1.00 <=1.00
Co (%) 0.50-2.00 0.50-2.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can EN 10088-1 X2CrNiMoCoN28-8-5-1 Be Substituted With EN 10088-1 X2CrNiMoCoN28-8-5-1?
EN 10088-1 X2CrNiMoCoN28-8-5-1 and EN 10088-1 X2CrNiMoCoN28-8-5-1 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNiMoCoN28-8-5-1 is often considered as a substitute for EN 10088-1 X2CrNiMoCoN28-8-5-1 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X2CrNiMoCoN28-8-5-1
0 active listings and RFQs →
EN 10088-1 X2CrNiMoCoN28-8-5-1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrNiMoCoN28-8-5-1 and EN 10088-1 X2CrNiMoCoN28-8-5-1?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X2CrNiMoCoN28-8-5-1 be substituted with EN 10088-1 X2CrNiMoCoN28-8-5-1?
EN 10088-1 X2CrNiMoCoN28-8-5-1 and EN 10088-1 X2CrNiMoCoN28-8-5-1 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNiMoCoN28-8-5-1 is often considered as a substitute for EN 10088-1 X2CrNiMoCoN28-8-5-1 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.